Honeywell W7006A Owner's Manual - Page 17

Product Release Version 3.x.x. Home Controller Gateway User Guide Setting Thermostats You can control thermostat temperature, system mode (heating, cooling, automatic, or off), or fan mode (continuous On or Auto), from the thermostat, the SUI, the telephone, and the Web interface. The thermostat and Web interfaces allow you to specifically set both a cool-mode temperature setting and a heat-mode temperature setting. The SUI and telephone interfaces only allow you to change one temperature setting. If the thermostat is in heat mode, temperature changes will affect the heat-mode temperature setting. If the thermostat is in cool mode, temperature changes will affect the cool-mode temperature setting. NOTE: The cool-mode temperature setting must be 3° higher than the heat-mode temperature setting. If the heat and cool mode temperature settings are within 3° of one another, the temperature settings are automatically adjusted to maintain the 3° difference. (See the thermostat user guide for more information.) To check room temperature: To check or change temperature settings: To check or change system mode: To check or change fan mode: Web The MyHome Portal Web interface lets you change thermostat settings and system modes to regulate temperature, and fan modes to regulate air circulation. Click the Home page navigation button to return to the status display on the Home page. Or click the Device Control navigation button to go to the device pages, then select Thermostats from the Show menu. Indoor temperature is shown next to the label "Room". Temperature settings are shown next to the label "Set" or "Setting". Use either the Home page or the thermostat Device Control page. Click the up arrow next to a current temperature setting to increase temperature. Click the down arrow next to a current temperature setting to decrease temperature. Each click changes the temperature by one degree. Choose Show thermostats on the Device Control page. Select an option under the System heading for the thermostat you want to change. You can set the system mode to Heat, Cool, Off or Auto. Choose Show thermostats on the Device Control page. Select an option under Fan heading for the thermostat you want to change. The fan can be set to On (continuous) or Auto (runs whenever the thermostat initiates a heating or cooling cycle). To change thermostat setting: To change thermostat mode: SUI The Wall Panel SUI interface lets you change thermostat settings and modes to regulate temperature, and fan modes to regulate air circulation. 1. Press the > or < keys until the Comfort screen is displayed. The first line of the screen displays a thermostat name, its current temperature reading, and its current temperature setting (in the box). 2. If desired, select a different thermostat by pressing the button next to the current thermostat name. 3. Press the button next to the Warmer or Cooler option until the correct temperature setting is displayed in the box. 4. Press OK to save the change (press Back to cancel the change). 1. On the Comfort screen, press the button next to the system/fan settings option. 13 69-1321-2