Honeywell W7006A Owner's Manual - Page 26
Configuring Thermostat Periods, Configuring Cameras, Adding/Deleting Devices
View all Honeywell W7006A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Home Controller Gateway User Guide Product Release Version 3.x.x To change the number of rings: If you do not have an answering machine or answering service, set the number-ofrings-before-pick-up to a number that is greater than the number of rings it usually takes you to answer the phone. For example, if you normally pick up the phone on the second ring, the Home & Away System should be set to pick up after three or more rings. On the System Configuration page, select Telephone in the Show settings for list, then select a value from the Number of rings pull-down list. To add a new camera: To remove a camera: To add a new device: To delete a device: Configuring Thermostat Periods Your programmable thermostat uses Periods (Wake, Leave, Return, Sleep) to automatically change thermostat settings. These periods will be configured during installation. You can view and modify them at any time using either your thermostat or the Web interface. To modify the period settings using the Web interface, navigate to the Schedule page and follow on-screen instructions to make changes. Configuring Cameras The Camera Configuration page allows you to add and remove Web video cameras to obtain video snapshots remotely. The cameras must be compatible with your Home & Away System. To configure the camera, first install the camera according to the instructions. You should be able to view the camera from a Web browser. Enter the IP address of the camera in one of the camera Web address fields. The Address should contain four numbers separated by periods (127.0.0.1) and click the button next to the camera address. This writes the camera address into the Home & Away System . Enter the Web address 0.0.0.0 and select the button at the end of the field. To modify the period settings using the Web interface, navigate to the Schedule page and follow on-screen instructions to make changes. Adding/Deleting Devices The Add/Delete Devices page allows you to add or delete lights from your system. Note that when you delete a light, it will be removed from the associated schedules and Lifestyles. Select the House code and Unit code address for the X10 device. Set the address wheels on the device to the same address. Select either light or appliance as the device type and enter a device name. The name should be less than 32 characters. Select Apply. The device is now available. Select the device name from the list and press the Delete button. 69-1321-1 22