Hoover S3670 Manual - Page 5
Polarized plug - windtunnel bagged canister
UPC - 073502029046
View all Hoover S3670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Polarized plug To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. 2-2 B 2-3 A ON-OFF switch After assembling cleaner, plug cord into electrical outlet. Turn cleaner on by depressing ON-OFF pedal (A). To turn cleaner off, depress pedal again. Note: Pedal opposite ON-OFF pedal is Cord Rewind Pedal (B). Check bag indicator The indicator will show a red light as bag fills with dirt. There are three conditions that will cause the indicator to become completely red: 1. The bag is full; change the bag. 2. Very fine materials (such as powder) have been picked up, clogging the bag pores; change the bag, even if it is not full. 3. There is a blockage in the nozzle, hose, tools, or at the bag opening; remove the blockage. 2-4 2-5 2-6 E D WindTunnel power nozzle Handle positions The handle has two positions when used with the power nozzle: upright and operating. To lower handle to operating position, place your foot firmly on the power nozzle and pull handle back. Floor surface selector Carpet or rug cleaning When using the power nozzle for carpet and rug cleaning, push the floor surface selector button toward "ON" (D). This setting provides the suction and agitator action necessary to deep clean carpets. The nozzle adjusts automatically to various carpet pile heights. Note: Turn surface selector switch to the "OFF" position before turning on canister. Hard surface floor cleaning The power nozzle can be used for cleaning hard surface floors such as wood, linoleum, vinyl, asphalt and rubber tile, sealed cork, concrete and terrazzo, as well as carpet. To set the power nozzle for hard surface floor cleaning, push the floor surface selector button toward "OFF" (E). This setting provides suction and no agitator action. If you prefer, you may use the hard floor tool to clean bare floors. You will find it particularly convenient when cleaning lightweight area rugs to set the floor surface selector button on "OFF" and continue cleaning the surrounding floor surfaces. Note: The headlight "ON" and "OFF" floor wsuilrlfbaeceOmNoindebso.th the 5