Husqvarna AUTOMOWER 550 EPOS Owner Manual - Page 24
To stop the product, 6 To switch off the product, WARNING, 7 To charge the battery
View all Husqvarna AUTOMOWER 550 EPOS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
operation mode is selected and the START button is pushed. 4.4.2 Select duration The product goes back to the charging station and stays for the selected park duration. Use the operation selection to temporary stop an ongoing mowing cycle and let the product to stay in the charging station. 4.4.3 Operating mode - Pause When selecting Pause in the Automower® Connect app, the product stop the current activity and pause. The product is paused until either Park or Start is selected in the Automower® Connect app. 4.5 To stop the product 1. Push the STOP button on top of the product. The product stops and the blade motor stops. Note: When you push the START button again, the product continues to operate in the same operating mode as before. WARNING: Always switch off the product using the Main switch if it requires maintenance, or if the product must be moved outside the work area. 4.7 To charge the battery WARNING: Only charge the product using a charging station which is intended for it. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery. In the event of leakage of electrolyte flush with water and seek medical help if it comes in contact with the eyes etc. When the product is new or has been in storage for a long period, the battery can be empty, charge the battery before you start the product. 1. Set the Main switch to position 1. 2. Put the product in as far as possible in the charging station. Make sure that the product and the charging station is connected. Refer to contact and charging strips in Product overview on page 5. 3. Make sure that the charging is in progress in the Automower® Connect app. 4.6 To switch off the product 1. Push the STOP button on top of the product. 2. Enter the Automower® Connect app and connect to the product with Bluetooth® short-range. Note: If the product is not connected to Automower® Connect with Bluetooth® when setting the Main switch to 0, the product is disabled but not switched off. When the product is disabled the motors are not allowed to run. 3. Set the Main switch to position 0. 24 - Operation 1576 - 003 - 30.12.2020