Husqvarna AUTOMOWER 550 EPOS Owner Manual - Page 3
Support, 2 System description, 3 Product description
View all Husqvarna AUTOMOWER 550 EPOS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
1 Introduction Serial number: PIN code: The serial number is on the product rating plate and on the product carton. 1.1 Support For support about the product, speak to your Husqvarna servicing dealer. 1.2 System description The EPOS system contains a robotic lawn mower, a charging station and a reference station. The robotic lawn mower and the reference station receive satellite signals for positioning. The reference station is stationary and sends correction data to the robotic lawn mower to get an accurate position of the robotic lawn mower. The work area for the product is made virtually in Automower® Connect app by operating the product and adding waypoints to make a map in the app. Refer to System overview on page 4. 1.3 Product description The operator selects the operation settings in the Automower® Connect app. The app shows the selected and possible operation settings, and the operation mode of the product. 1.3.1 Mowing technique The product is emission free, easy to use and saves energy. The frequent cutting technique improves the grass quality and decreases the use of fertilizers. Collection of grass is not necessary. 1.3.2 Find the charging station The product operates until the battery state of charge is low, then the product starts to find its way to the charging station. The product uses EPOS guidance to find the charging station. EPOS guidance uses satellite signals to find a path to the charging station that reduces the wear on the lawn. Note: Husqvarna regularly updates the appearance and function of the products. Refer to Support on page 3. The product is a robotic lawn mower. The product has a battery power source and cuts grass automatically. It continuously alternates between mowing and charging. The movement pattern is random, which means that the lawn is mowed evenly and with less wear. The virtual boundary specifies the work area where the product is allowed to operate. The satellite receiver in the product senses when it is approaching the virtual boundary. When the product hits an obstacle or approaches the virtual boundary the product selects a new direction. 1.3.3 Connectivity Automower® Connect is a mobile application that is used for the installation of the product and makes it possible to select the operation settings remotely. Refer to Automower® Connect on page 16. Husqvarna Fleet Services™ is a cloud solution where multiple products can be added to get an overview of all products and control them remotely. Husqvarna Fleet Services™ is available as a web service and as an app. Refer to Husqvarna Fleet Services™ on page 16. 1576 - 003 - 30.12.2020 Introduction - 3