IBM 4800-741 Operation Guide - Page 50
connected.
View all IBM 4800-741 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Updated October 31, 2007 Figure 18. Removing the sheet metal panel 5. See Figure 18 and place the unit in the operating position. Note: If you are installing a UPS, follow the remainder of these steps. If you are not inserting a UPS, go to Step 7 on page 32 to secure the expansion housing to the system unit. a. To install the UPS, remove the sheet metal panel (see Figure 18.) b. The unit as shipped from the factory does not have the battery connected. Connect the battery to the UPS as follows: Figure 19. Connecting the battery to the UPS c. See Figure 19, Picture 1. With the UPS on its side, remove the battery door. d. See Picture 2. Pull the battery out of the UPS such that you can view the wiring and plug. e. Connect the plug with the red wire (Picture 3). 30 SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Planning, Installation, and Operation Guide