IBM 4800-741 Hardware Service Guide - Page 50
Removing, plate
View all IBM 4800-741 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Updated July 14, 2008 Removing the top plate To remove the top plate: 1. Remove the front bezel and top cover by following the steps in "Removing the covers" on page 29. D X8 Figure 20. Top plate screws 2. See Figure 20. Locate and remove the eight screws ( D ) holding the top plate. 3. Slide the cover backward and then lift upward to remove. Important Before servicing the inside of the machine and after you have removed the top cover, verify that no system board LEDs (red) are illuminated. A red LED indicates the presence of power; you must remove theACpower cord before continuing. 4. To replace, reverse these procedures. Note: To ensure stability, locate the screw holes imprinted with an arrow. These should contain screws. 32 SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Hardware Service Guide