IBM 4800-741 Hardware Service Guide - Page 58
cone-shaped
View all IBM 4800-741 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Updated July 14, 2008 Figure 28. Location of alignment pen holes 2. Locate the rubber seal ( A in Figure 28) on the housing and near the exhaust fan. 3. Pull to remove. To reinstall: 1. Align the rubber seal with the holes on the chassis, insuring that each cone-shaped protrusion has a matching hole. 2. Using a pair of pliers, pull the cone-shaped protrusions through the holes. 40 SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Hardware Service Guide
2.
Locate
the
rubber
seal
(
±A²
in
Figure
28)
on
the
housing
and
near
the
exhaust
fan.
3.
Pull
to
remove.
To
reinstall:
1.
Align
the
rubber
seal
with
the
holes
on
the
chassis,
insuring
that
each
cone-shaped
protrusion
has
a
matching
hole.
2.
Using
a
pair
of
pliers,
pull
the
cone-shaped
protrusions
through
the
holes.
Figure
28.
Location
of
alignment
pen
holes
Updated
July
14,
2008
40
SurePOS
700
Series:
SurePOS
700-721/741/781,
722/742/782
Hardware
Service
Guide