IBM 4800-741 Hardware Service Guide - Page 94

Method, Entering, during, start-up

Get IBM 4800-741 PDF manuals and user guides View all IBM 4800-741 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

Updated July 14, 2008 Figure 64. Disk drive failure 2. Determine which hard disk drive has failed by opening the detected hard drive (see Figure 64). In the example, the detected hard drive's Device Port is 1; therefore, the failed hard drive is located on Device Port 0. 3. Initiate shutdown and power off the machine (Start, Shutdown, press the power switch, or follow the procedure for your business.) 4. Continue with the steps described in "Replacing and rebuilding a hard drive" on page 77. Method two: Entering RAID during start-up 1. Shutdown and reboot the machine (Start, Shutdown, press the power switch, or follow the procedure for your business.) 76 SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Hardware Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
2.
Determine
which
hard
disk
drive
has
failed
by
opening
the
detected
hard
drive
(see
Figure
64).
In
the
example,
the
detected
hard
drive’s
Device
Port
is
1;
therefore,
the
failed
hard
drive
is
located
on
Device
Port
0.
3.
Initiate
shutdown
and
power
off
the
machine
(
Start
,
Shutdown
,
press
the
power
switch,
or
follow
the
procedure
for
your
business.)
4.
Continue
with
the
steps
described
in
“Replacing
and
rebuilding
a
hard
drive”
on
page
77.
Method
two:
Entering
RAID
during
start-up
1.
Shutdown
and
reboot
the
machine
(
Start
,
Shutdown
,
press
the
power
switch,
or
follow
the
procedure
for
your
business.)
Figure
64.
Disk
drive
failure
Updated
July
14,
2008
76
SurePOS
700
Series:
SurePOS
700-721/741/781,
722/742/782
Hardware
Service
Guide