IBM 4800-741 Hardware Service Guide - Page 65
Removing, control, switch
View all IBM 4800-741 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Updated July 14, 2008 Removing the control switch card To remove the control switch card: 1. Follow the instructions in "Removing the covers" on page 29 to remove the front bezel and top cover. A B Figure 35. Removing the control switch card 2. See Figure 35. Remove the screw ( A ) holding the card in place. 3. Lift the card from the unit. 4. Unplug the cable that is attached to the card connector ( B ). 5. To replace the card, reverse these procedures. Chapter 2. Removal and replacement procedures 47
Removing
the
control
switch
card
To
remove
the
control
switch
card:
1.
Follow
the
instructions
in
“Removing
the
covers”
on
page
29
to
remove
the
front
bezel
and
top
cover.
2.
See
Figure
35.
Remove
the
screw
(
±A²
)
holding
the
card
in
place.
3.
Lift
the
card
from
the
unit.
4.
Unplug
the
cable
that
is
attached
to
the
card
connector
(
±B²
).
5.
To
replace
the
card,
reverse
these
procedures.
A
B
Figure
35.
Removing
the
control
switch
card
Updated
July
14,
2008
Chapter
2.
Removal
and
replacement
procedures
47