IBM 8482 User Manual - Page 37
Removing the bezel, front of the server.
UPC - 000435244659
View all IBM 8482 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Removing the bezel When working with some devices, such as additional optical drives, you must first remove the bezel to access the device. Complete the following steps to remove the bezel: 1. Unlock the side-cover lock. 2. Remove the side cover (see "Removing the side cover" on page 26). 3. Locate the bezel-release lever; then, press the bezel-release lever toward the front of the server. 4. Pull the top of the bezel away from the chassis; then, push the bezel down to disengage the bottom tabs. 5. Remove the bezel from the server and store the bezel in a safe place. For instructions for replacing the bezel, see "Replacing the bezel" on page 50. Chapter 4. Installing options 27
Removing the bezel
When working with some devices, such as additional optical drives, you must first
remove the bezel to access the device.
Complete the following steps to remove the bezel:
1.
Unlock the side-cover lock.
2.
Remove the side cover (see “Removing the side cover” on page 26).
3.
Locate the bezel-release lever; then, press the bezel-release lever toward the
front of the server.
4.
Pull the top of the bezel away from the chassis; then, push the bezel down to
disengage the bottom tabs.
5.
Remove the bezel from the server and store the bezel in a safe place.
For instructions for replacing the bezel, see “Replacing the bezel” on page 50.
Chapter 4. Installing options
27