Icom IC-78 Instruction Manual - Page 34
The default is At Auto. - hf transceiver
View all Icom IC-78 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
5 SET MODE s Initial set mode items- (continued) • Key type Selects the CW paddle type. Four selections are available. • n : normal (for electronic keyer use) • r : reverse (for electronic keyer use) • oF : Turns OFF the electronic keyer (for straight key use) • ud : For using the microphone's [UP]/[DN] keys instead of the paddle. The default is n (normal). • Tuner type Selects the connected antenna tuner type. Four selections are available. • no : No optional tuner is connected. • 4 : When AH-4 is connected. • 12 : When AT-120 is connected. • 13 : When AT-130 is connected. The default is no. • Number of maximum memory channels Sets number of programmable memory channels from 1 to 99. The default is 99. • CI-V baud rate Sets the data transfer rate. When "Auto" is selected, the baud rate is automatically set according to the connected controller or remote controller. The default is At (Auto). • CI-V address To distinguish equipment, each CI-V transceiver has its own Icom standard address in hexadecimal code. The IC-78's address is 62. When 2 or more IC-78s are connected to an optional CT-17 CI-V LEVEL CONVERTER, rotate the main dial to select a different address for each IC-78 in the range 01H to 7FH. The default is 62. • CI-V Transceive Transceive operation is possible with the IC-78 connected to other Icom HF transceivers or receivers. When "on"is selected, changing the frequency, operating mode, etc. on the IC-78 automatically changes those of connected transceivers (or receivers) and vice versa. The default is on. • CI-V 731 mode When connecting the IC-78 to the IC-735 for transceive operation, you must change the operating frequency data to 4 bytes. • This item MUST be set to "on" when operating the transceiver with the IC-735. The default is oF (off). 32