Icom IC-78 Instruction Manual - Page 6
Function display
View all Icom IC-78 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2 PANEL DESCRIPTION s Function display q w e r t y !6 !5 !4 !3 !2 !0 !1 u q LOCK INDICATOR (p. 14) Appears when the dial lock function is in use. w RECEIVE INDICATOR Appears while receiving a signal or when the squelch is open. e TUNE INDICATOR ¯ Appears or disappears when the connected automatic tuner is tuned completely, depending on connected antenna tuner type. ¯ Flashes while tuning. r TRANSMIT INDICATOR ¯ Appears while transmitting. ¯ Flashes while transmit frequency is indicated. t ALARM INDICATOR This indicator appears only some versions. Appears while 2-tone alarm is emitting or transmitting y FUNCTION INDICATORS ¯ "P.AMP" appears when preamp is activated. ¯ "ATT" appears when the RF attenuator is activated. ¯"NB" appears when the Noise Blanker is activated. ¯ "BK" appears when the semi break-in function is selected in quick set mode. ¯ "F-BK" appears when the full break-in function activates in CW mode. (p. 23) ¯"VOX" appears when the VOX function is selected in quick set mode. ¯ "COM" appears when the speech compressor activates in SSB mode. ¯ "SCAN" appears during scanning. • Flashes when scan is paused. u SIGNAL/SQL/RF-GAIN METER ¯ Functions as an S-meter while receiving. ¯ Functions as a Power, ALC or SWR meter while transmitting. (p. 16) io i VFO/MEMORY INDICATOR ¯ "MEMO" appears during regular operation. This indicator appears only some versions. ¯ "VFO" appears during VFO operation. o CHANNEL NUMBER READOUT (p. 13) Shows the selected channel number. !0 BLANK INDICATOR Appears when no frequency programmed channel is selected. !1 SPLIT INDICATORS (p. 13) Appears when the duplex channel, in which different frequencies between transmit and receive are programmed, is selected. !2 RIT INDICATOR (p. 19) Appears when the RIT function is in use. !3 CHANNEL READOUT Shows the memory names, or stored frequency of the selected channel. !4 REVERSE INDICATOR (p. 15) Appears when the CW reverse or RTTY reverse mode is selected. !5 WIDE/NARROW FILTER INDICATORS (pgs. 21, 22) ¯" " appears when the wide IF filter is selected. ¯" " appears when the narrow IF filter is selected. !6 MODE INDICATORS (p. 15) Indicates the temporarily selected operating mode. 4