Icom IC-A14 Instruction Manual - Page 17
MEMORY OPERATION, n Memory channel selection, n Memory bank selection (Available with IC-A14 only)
View all Icom IC-A14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4 MEMORY OPERATION n Memory channel selection n Memory bank selection 1 IC-A14 has 200 memory channels (20 channels × 10 banks; de- (Available with the IC-A14 only) 2 fault setting) and IC-A14S has 100 memory channels for storage of often-used frequencies. A 200 of the IC-A14's memory channels are divided into 3 bank (up to 10 banks are available depending on setting) for sim- 4 q Push [MR] to select memory mode. ple memory grouping. • Memory indicator appears and memory channel number is dis- 5 played briefly. • Memory bank number also displays with IC-A14. q Push [MR] to select memory mode. w Push [FUNC], and push [BANK](3) to enter bank selec- 6 Appears when memory tion mode. 7 mode is selected. 8 Using [Y]/[Z]: Appears when bank selec- tion mode is selected. 9 w Push [Y]/[Z] to select the desired memory CH number. e Push [Y]/[Z] or ap- 10 • Memory channel number is displayed briefly, then programmed frequency (or memory name, if programmed) is displayed. propriate digit key ([0] to [9]) to enter 11 • If no memory CH is programmed, no memory CH selection is available. the desired memory 12 Using the Keypad- IC-A14 only: BANK number, then push [ENT]. 13 w Push 2 appropriate digit key (00 to 99, depending on r Push [Y]/[Z], or 2 14 bank setting condition) to select the desired memory CH number, then push [ENT]. • Memory channel number is displayed briefly, then programmed frequency (or memory name, if programmed) is displayed. • If no memory CH is programmed in the selected BANK, no memory CH selection is available. appropriate digit key [Y] and [ENT] to select the desired memory [Z] channel. [ENT] [MR] 15 [BANK](3) 16 Keypad [FUNC] 17 18 19 12