Icom IC-A14 Instruction Manual - Page 20

4 MEMORY OPERATION n Memory names The memory channel can display an 8-character name instead of the programmed frequency. D Programming memory names q Set the desired frequency in frequency mode. (p. 8) w Enter the select memory write mode. • For IC-A14; push [FUNC] then push [MW](MR). • For IC-A14S; push and hold [MR] for 1 sec. e Select the desired memory channel to be programmed with [Y]/[Z] (or keypad and [ENT]; for IC-A14 only). r Push [MR] momentarily to enter the memory name programming mode appears and 1st digit blinks. • Available characters KEY CHARACTER [1] 1, Q, Z [2] 2, A, B, C [3] 3, D, E, F [4] 4, G, H, I [5] 5, J, K, L KEY [6] [7] [8] [9] [0] CHARACTER 6, M, N, O, 7, P, R, S 8, T, U, V 9, W, X, Y 0, _ (space), - For IC-A14 t Push the appropriate digit key several times to select the desired character as listed at right. • To move the cursor forwards or backwards, use [Y]/[Z]. • The cursor moves forwards automatically when a different key is pushed. • To erase a character, overwrite with a space (displayed as "_"). y Push [ENT] to program the name and frequency at the same time. • Return to the frequency indication. • When no name is programmed, the display shows the pro- grammed frequency. • To clear the entered memory names, push [CLR] before push- ing [ENT]. For IC-A14S t Push [Y]/[Z] several times to select the desired character. • To move the cursor forwards, use [MR]. • To erase a character, overwrite with a space (displayed as "_"). y Push and hold [MR] for 1 sec. to program the name and frequency at the same time. • Return to the frequency indication. • When no name is programmed, the display shows the pro- grammed frequency. • To clear the entered memory names, push [CLR] before push- ing and holding [MR] for 1 sec. 15