Icom IC-A14 Instruction Manual - Page 21

MEMORY OPERATION 4 n Copying memory contents 1 NOTE: When programming a memory name to the pro- This function copies a memory channel's contents into the 2 grammed memory channel, operate as follow. frequency mode. This is useful when searching for signals 3 around a memory channel's frequency. q Select the desired memory channel that requires a name. 4 (see p. 12). For IC-A14 w Push [FUNC] then push [MW](MR). q Push [MR] to select memory mode. w Select the desired memory channel to be transferred 5 using [Y]/[Z] (or keypad and [ENT]; for IC-A14 only). 6 • Select the desired bank if desired. • The selected memory contents copied into frequency mode 7 and frequency mode is selected automatically. For IC-A14 e Push [FUNC] then push [MW](MR) again. e Push [FUNC], then push [MW](MR) to copy the memory 8 r Push [MR] momentarily to select memory name programming mode. channel's contents into the frequency mode. • Frequency mode is automatically selected. 9 t Perform the steps t and y described at left page in "For IC-A14" to program the desired memory name. For IC-A14S e Push and hold [MR] for 1 sec. to copy the memory chan- 10 11 For IC-A14S w Push and hold [MR] for 1 sec. nel's contents into the frequency mode. • Frequency mode is automatically selected. 12 • The selected memory contents copied into frequency mode 13 and frequency mode is selected automatically. e Push and hold [MR] for 1 sec. again. 14 r Push [MR] momentarily to select memory name programming mode. 15 t Perform the steps t and y described at left page in "For 16 IC-A14S" to program the desired memory name. 17 18 19 16