Icom IC-A14 Instruction Manual - Page 40

Specifications - transmitter

Page 40 highlights

10 SPECIFICATIONS D General • Frequency coverage : IC-A14 TX 118.000 to 136.975 MHz RX 108.000 to 136.975 MHz WX (Rx only) 161.650 to 163.275 MHz IC-A14S TX/RX 118.000 to 136.975 MHz • Audio harmonic distortion • Hum and noise ratio • Spurious emissions • External MIC connector : Less than 10% (at 60% mod.) : More than 35 dB : More than 46 dB (except operating frequency ±62.5 kHz range) : 3-conductor 2.5(d) mm (1⁄10˝)/ 150 Ω • Mode : 6K00A3E 16K0G3E (IC-A14/Rx only) D Receiver • Channel spacing : 25 kHz • Number of memory channels : IC-A14 200 (20 CH × 10 BANKS) IC-A14S 100 • Power supply requirement : Specified Icom's battery packs 7.4 V DC standard • Usable temperature range : -10˚C to +60˚C (+14°F to +140°F) • Current drain (at 7.4 V DC) : Tx 1.5 A Rx at stand by 50 mA typical at AF max. 500 mA • Antenna connector : BNC 50 Ω (nominal) • Dimensions : 53(W) × 120(H) × 36.9(D) mm (projections not included) 23⁄32(W) × 423⁄32(H) × 19⁄16(D) inch • Weight : Approx. 180 g (6.35 oz) (Without the battery pack and antenna.) • Receive system : Double conversion superhetero- dyne • Intermediate frequencies : 1st 46.35 MHz, 2nd 450 kHz • Sensitivity : COM band (6 dB S/N) -6 dBµ typical NAVI band (6 dB S/N) -3 dBµ typical (IC-A14 only) WX channels (12 dB SINAD) -13 dBµ typical (IC-A14 only) • Squelch sensitivity (threshold) : AM Less than 0 dBµ FM Less than -5 dBµ (IC-A14 only) • Selectivity : 6 dB (More than 7.5 kHz) 60 dB (Less than 25 kHz) • Spurious response rejection : AM More than 60 dB FM More than 30 dB (IC-A14 only) • Audio output power : More than 700 mW (internal SP) (at 10% distortion with an 8 Ω More than 500 mW (external SP) D Transmitter • Output power : 5.0 W (PEP) typical 1.5 W (CW) load, 30% mod.) • Hum and noise • External SP connector : More than 35 dB at 30% mod. : 3-conductor 3.5 (d) mm (1⁄8˝)/8 Ω • Modulation : Low level modulation • Modulation limiting : 70 to 100% • Frequency stability : ±5 ppm All stated specifications are subject to change without notice or obligation. 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

35
10
SPECIFICATIONS
D
General
• Frequency coverage
:
IC-A14
TX
118.000 to 136.975 MHz
RX
108.000 to 136.975 MHz
WX (Rx only)
161.650 to 163.275 MHz
IC-A14S
TX/RX
118.000 to 136.975 MHz
• Mode
: 6K00A3E
16K0G3E (IC-A14/Rx only)
• Channel spacing
: 25 kHz
• Number of memory channels :
IC-A14
200 (20 CH
×
10 BANKS)
IC-A14S
100
• Power supply requirement
: Specified Icom’s battery packs
7.4 V DC standard
• Usable temperature range
: –10˚C to +60˚C (+14°F to +140°F)
• Current drain (at 7.4 V DC)
:
Tx
1.5 A
Rx
at stand by
50 mA typical
at AF max.
500 mA
• Antenna connector
: BNC 50
Ω
(nominal)
• Dimensions
: 53(W)
×
120(H)
×
36.9(D) mm
(projections not included)
2
3
32
(W)
×
4
23
32
(H)
×
1
9
16
(D) inch
• Weight
: Approx. 180 g (6.35 oz)
(Without the battery pack and antenna.)
D
Transmitter
• Output power
: 5.0 W (PEP) typical
1.5 W (CW)
• Modulation
: Low level modulation
• Modulation limiting
: 70 to 100%
• Frequency stability
: ±5 ppm
• Audio harmonic distortion
: Less than 10% (at 60% mod.)
• Hum and noise ratio
: More than 35 dB
• Spurious emissions
: More than 46 dB
(except operating
frequency ±62.5 kHz range)
• External MIC connector
: 3-conductor 2.5(d) mm (
1
10
˝)/
150
Ω
D
Receiver
• Receive system
: Double conversion superhetero-
dyne
• Intermediate frequencies
: 1st 46.35 MHz, 2nd 450 kHz
• Sensitivity
:
COM band
(6 dB S/N)
–6 dBµ typical
NAVI band
(6 dB S/N)
–3 dBµ typical
(IC-A14 only)
WX channels
(12 dB SINAD)
–13 dBµ typical
(IC-A14 only)
• Squelch sensitivity
(threshold)
: AM
Less than 0 dBµ
FM
Less than –5 dBµ
(IC-A14 only)
• Selectivity
: 6 dB (More than 7.5 kHz)
60 dB (Less than 25 kHz)
• Spurious response rejection
: AM
More than 60 dB
FM
More than 30 dB
(IC-A14 only)
• Audio output power
: More than 700 mW
(internal SP)
(at 10% distortion with an 8
Ω
More than 500 mW
(external SP)
load, 30% mod.)
• Hum and noise
: More than 35 dB at 30% mod.
• External SP connector
: 3-conductor 3.5 (d) mm (
1
8
˝)/8
Ω
All stated specifications are subject to change without notice or obligation.