Icom IC-A14 Instruction Manual - Page 23

5 SCAN OPERATION n Scan types n COM band scan 1 The IC-A14 has 3 scan types to suit your needs. IC-A14S q Push [CLR] to select the frequency mode. 2 has 2 scan types. COM BAND SCAN 108.00 118.00 w Push [SQLY]/[SQLZ] to set the squelch level to the point where noise is just muted. 3 136.975 Repeatedly scans For IC-A14 4 MHz MHz MHz a l l f r e q u e n c i e s e Push [FUNC], then push [SCAN](2) to start the scan. 5 Scan Jump over the entire COM band. • When a signal is received, the scan pauses until it disappears. • To change the scanning direction, push [Y]/[Z]. 6 For IC-A14S 7 MEMORY SCAN non-TAG channel e Push and hold [Y]/[Z] for 1 sec. to start the scan. 8 • When a signal is received, the scan pauses until it disappears. Repeatedly scans se- • To change the scanning direction, push [Y]/[Z]. 9 Mch 2 Mch 4 Mch 6 lected memory bank's r To stop the scan, push [CLR]. 10 Mch 1 Mch 7 all "TAG" memory chan- non-TAG nels. Used for checking 11 Mch 19 Mch 10 Mch 8 channel often-used channels and 12 bypassing usually busy channels such as control- 13 tower frequencies. 14 WEATHER CHANNEL SCAN Repeatedly scans all "TAG" weather channels. Weather channels are available for the IC-A14 only. Decimal point blinks during scan. [Z] 15 [Y] 16 [CLR] [SCAN](2) 17 [FUNC] 18 19 18