Icom IC-A14 Instruction Manual - Page 18

4 MEMORY OPERATION n Programming a memory channel Program often-used frequencies with the following instructions. D For IC-A14 q Push [CLR] to select the frequency mode, if necessary. w Set the desired frequency. (p. 8) • P ush [FUNC], then push [WX](7) to select a weather channel mode, and then select the desired weather channel using [Y]/[Z] or keypad if desired. (p. 23) e Push [FUNC] then push [MW](MR) to enter the select memory write mode. • Memory mode indicator blinks. Blinks when select memory write mode is selected. No frequency is displayed when a blank channel is selected. r Push [Y]/[Z] to select the desired memory channel number. • P ush [FUNC], then push [BANK](3) to enter bank selection mode, and push [Y]/[Z] or appropriate digit key ([0]-[9]), then push [ENT] to select the BANK number if desired. t Push [ENT] to program the set condition into the memory channel and return to the frequency mode. • EXAMPLE: P rogramming WX-05 into memory channel 9 in memory BANK 3. Push Push then Push or , or, push Push then Push then Push then *Shows briefly. Push or , or, push *Shows briefly. Push to complete the programmig. 13