Icom IC-A14 Instruction Manual - Page 24
n Memory scan, n Weather channel scan (Available with the IC-A14 only
View all Icom IC-A14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
5 SCAN OPERATION n Memory scan NOTE: Program 2 or more memory channels with "TAG" setting to start memory scan. q Push [MR] to select memory mode. • For IC-A14, select the desired BANK if desired. (p. 12) w P ush [SQLY]/[SQLZ] to set the squelch level to the point where noise is just muted. For IC-A14 e Push [FUNC], then push [SCAN](2) to start the scan. • When a signal is received, the scan pauses until it disappears. • To change the scanning direction, push [Y]/[Z]. For IC-A14S e Push and hold [Y]/[Z] for 1 sec. to start the scan. • When a signal is received, the scan pauses until it disappears. • To change the scanning direction, push [Y]/[Z]. n Weather channel scan (Available with the IC-A14 only) q Push [FUNC], then push [WX](7) to select a weather channel mode. w Set squelch to the point where noise is just muted with [SQLY]/[SQLZ]. e Push [FUNC], then push [SACN(2) to start the scan. • When a signal is received, the scan pauses until it disappears. • To change the scanning direction, push [Y]/[Z]. r To stop the scan, push [CLR]. r To stop the scan, push [CLR]. Decimal point blinks during scan. [Z] [Y] [MR] [SCAN](2) Decimal point blinks during scan. [Z] [Y] [SCAN](2) [WX](7) [FUNC] [FUNC] 19