Icom ID-52A Basic Manual english

Icom ID-52A Manual

Get Icom ID-52A PDF manuals and user guides View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals

Icom ID-52A manual content summary:

  • Icom ID-52A | Basic Manual english - Page 1
    BASIC MANUAL VHF/UHF TRANSCEIVER ID-52A ID-52E This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER
  • Icom ID-52A | Basic Manual english - Page 2
    manual contains basic operating instructions for the ID-52A/ID-52E. For advanced operating instructions, see the Advanced manual for details. The Advanced manual can be downloaded from the following internet address: https://www.icomjapan.com/support/ ■■ Features zz D-STAR operation: The ID-52A/ID
  • Icom ID-52A | Basic Manual english - Page 3
    , if not installed 10 and used in accordance with the instructions, may cause harmful interference to radio communications. However, there the laws in your area. BASIC MANUAL ■■ About CE and DOC Hereby, Icom Inc. declares that the versions of ID-52E which have the "CE" symbol .com/support/ ii
  • Icom ID-52A | Basic Manual english - Page 4
    can download each manual and guide from the Icom website: https://www.icomjapan.com/support/ Enter "ID-52A" or "ID-52E" into the Search box on the site. Basic manual (This manual) Instructions for basic operations and precautions. Advanced manual (PDF type) Instructions for the advanced operations
  • Icom ID-52A | Basic Manual english - Page 5
    an unstable connection. In 13 such cases, use this device away from the other devices, or stop using those devices. LL See the Advanced manual for details. 14 DDSpurious signals 15 Using the Dualwatch function, or monitoring the broadcast FM radio band while using the Dualwatch function, may
  • Icom ID-52A | Basic Manual english - Page 6
    ■■ Unique functions This section introduces unique functions built into the ID-52A/ID-52E. LL See the Advanced manual or "About the DV Gateway function" that can be downloaded from the Icom website for more details. 1 DV Gateway function Even if you cannot access a D-STAR repeater, you can make a
  • Icom ID-52A | Basic Manual english - Page 7
    with your own call 6 sign and transmits your position data. (Advanced manual) 7 2 Your position is automatically transmitted. 8 9 1 A call addressed to 10 your own call sign. Destination 11 Your station (ID-52A/ID-52E) 3 After receiving, the screen shows your 12 position data. 13
  • Icom ID-52A | Basic Manual english - Page 8
    trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Icom Inc. is under license. Other trademarks and trade names are those of license. Refer to the "About the Licenses" page at the end of the manual in English for information on the open source software being used in this product.
  • Icom ID-52A | Basic Manual english - Page 9
    transceiver. NEVER place in an insecure place to avoid inadvertent use by unauthorized persons. DO NOT push PTT unless you actually intend to transmit. BASIC MANUAL viii
  • Icom ID-52A | Basic Manual english - Page 10
    heats up, or is discolored or deformed. If any of these conditions occur, contact your Icom dealer or distributor. CAUTION: DO NOT use the battery pack out of the specified temperature months). -20˚C (-4˚F) ~ +20˚C (+68˚F) (within a year). * BP-307: -20˚C (-4˚F) ~ +40˚C (+104˚F) BASIC MANUAL ix
  • Icom ID-52A | Basic Manual english - Page 11
    NOT charge the battery pack outside of the specified temperature 18 range: 0˚C ~ 40˚C (32˚F ~ 104˚F). Icom recommends charging the pack at 25˚C (77˚F). The pack may heat up or rupture if charged out of the specified the unit. Remove it from the AC power outlet when not in use. BASIC MANUAL x
  • Icom ID-52A | Basic Manual english - Page 12
    Features i ■■ Explicit definitions i ■■ Supplied Accessories ii ■■ FCC Information ii ■■ Disposal ii ■■ About CE and DOC ii ■■ About the ID-52A/ID-52E manuals���iii ■■ Important Notes iv DD When using the GPS receiver iv DD Electromagnetic Interference iv DD Spurious signals iv DD About
  • Icom ID-52A | Basic Manual english - Page 13
    6 RECORDING A QSO ONTO A D-STAR GUIDE microSD CARD 25 INTRODUCTION 41 1 ■■ About the microSD card 25 ■■ Setting the Record 10 MAINTENANCE 37 ■■ Resetting 37 17 DD Partial Reset 37 ■■ Troubleshooting 38 18 D-STAR GUIDE 40 INDEX 67 ABOUT THE LICENSES 69 MENU SCREEN ITEMS 71 BASIC
  • Icom ID-52A | Basic Manual english - Page 14
    21 13 12 22 Internal Microphone 1 PTT SWITCH [PTT] Hold down to transmit, release to receive. LL For the ID-52E only Push briefly and release, and then hold down to transmit a 1750 Hz tone burst. 2 SQUELCH KEY [ Hold down for 1 second to open the Scan Type Select window. (p. 17) 1 BASIC MANUAL
  • Icom ID-52A | Basic Manual english - Page 15
    • SELECT MEMORY WRITE KEY [MR]/[MW] zz Push to enter the Memory mode. (p. 14) 7 LL For the ID-52A only In the Memory mode, push once to enter the Weather Channel mode. 8 zz Hold down for 1 second to open to the supplied battery charger to charge the attached battery pack. (p. 6) BASIC MANUAL 2
  • Icom ID-52A | Basic Manual english - Page 16
    ICON Displayed when the GPS Alarm function is ON. 12 microSD ICON (p. 8) ••Displayed when a microSD card is inserted. 3 ••Blinks while accessing the microSD card. BASIC MANUAL
  • Icom ID-52A | Basic Manual english - Page 17
    the Weather Alert function is ON. (Only the ID-52A) 19 SKIP ICONS 8 ••SKIP: Displayed when Memory window. 25 FREQUENCY READOUT Displays an operating frequency. BASIC MANUAL 26 MAIN BAND ICON ••When the Dualwatch function is Icom website about the Terminal mode and the Access Point mode. 4
  • Icom ID-52A | Basic Manual english - Page 18
    around 0°C (32°F) or below, the Battery Protection function automatically sets the transceiver power to Low1 power (0.5 W), and disables power selections High, Mid, and Low2. 5 BASIC MANUAL
  • Icom ID-52A | Basic Manual english - Page 19
    [DC IN] BC-167S LL The shape is different and supplied or optional, depending on the charger version. Turn OFF To an AC outlet BASIC MANUAL Charging time: Approximately 5 hours (When charging the BP-272 with the BC-167S) LL See the Advanced
  • Icom ID-52A | Basic Manual english - Page 20
    OFF the transceiver. [] ■■ Adjusting the audio level Rotate [VOL] to adjust the audio level. LL The display shows the audio level while adjusting. [VOL] BASIC MANUAL 7
  • Icom ID-52A | Basic Manual english - Page 21
    the functions or ignore the messages and select "YES." 12 LL To exit the MENU screen, push [MENU]. 13 14 15 16 17 18 BASIC MANUAL 8
  • Icom ID-52A | Basic Manual english - Page 22
    To exit the MENU screen, push [MENU]. TIP: You can edit the saved settings on your PC using the optional CS-52 programming software. 9 BASIC MANUAL
  • Icom ID-52A | Basic Manual english - Page 23
    transceiver has a built-in GPS receiver. You can check your current location, and transmit GPS data in the DV mode. See the Advanced manual for details. 1 Confirm the GPS receiver is receiving satellite data. 2 The GPS icon blinks when searching for satellites. → → → 3 The GPS icon stops
  • Icom ID-52A | Basic Manual english - Page 24
    Dualwatch operation The Dualwatch function simultaneously monitors 2 frequencies. The ID-52A/ID-52E has 2 independent receiver circuits, A band and B DDMAIN band selection B band is out of the selectable frequency range. BASIC MANUAL Push [MAIN] to alternately set the A band or B band as the
  • Icom ID-52A | Basic Manual english - Page 25
    system. 16 ••"OPEN" is the continuously open setting. ••In the DV mode, you cannot set the squelch to "OPEN." Maximum squelch level 17 18 BASIC MANUAL 12
  • Icom ID-52A | Basic Manual english - Page 26
    FM-N. *2 For only DV. *3 For only FM/FM-N/DV. *4 For only A band. *5 For only the ID-52A. DDQuick Menu window operation Simplified description-'Select' operation In this manual, the user's 'Select' operation is simplified, as described below. Simplified description: 1. Push [QUICK]. 2. Select "TS
  • Icom ID-52A | Basic Manual english - Page 27
    Weather Channel mode (For only the ID-52A) 7 Weather Channels are used for 1 second to select the Call Channel mode. ••For only the ID-52A, push [MR] in the Memory mode to select the Weather Channel call but also a simplex call. BASIC MANUAL Hold down [DR] for 1 second. ••Displays the DR screen
  • Icom ID-52A | Basic Manual english - Page 28
    ] > GPS > GPS TX Mode) TIP: You can make a simplex call not only in the FM mode but also in the DV mode. FM mode BASIC MANUAL 15
  • Icom ID-52A | Basic Manual english - Page 29
    location. LL You can use the Attenuator only on the A band. 1. Push [QUICK]. 2. Select "ATT." 3. Select "ON." ••"ATT" is displayed. The Attenuator is ON. BASIC MANUAL 16
  • Icom ID-52A | Basic Manual english - Page 30
    to locate stations to contact or listen to, or to skip unwanted channels or frequencies. This section describes the basic scan operation. See the Advanced manual for details. Example: Scanning in the VFO mode 1. Push [VFO/MHz] to enter the VFO mode. 2. Hold down [SCAN] for 1 second. ••Opens the Scan
  • Icom ID-52A | Basic Manual english - Page 31
    mode), or "Set Repeater" (DR screen). ••Sets a Home Channel, then returns to the standby 8 screen. 9 10 11 12 13 14 15 16 17 18 BASIC MANUAL 18
  • Icom ID-52A | Basic Manual english - Page 32
    briefly before you start speaking. 2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, then speak at your normal voice level. Microphone BASIC MANUAL 19
  • Icom ID-52A | Basic Manual english - Page 33
    and then select "." 13 14 15 16 17 18 ■■ Lock function Activate to prevent accidental frequency changes and unnecessary function access. BASIC MANUAL Hold down [ ] for 1 second to turn ON the Key Lock function. ••When the Key Lock function is ON, and the locked key or [DIAL
  • Icom ID-52A | Basic Manual english - Page 34
    to set infrequently changed values or function settings. See the appendix for the MENU item list. (p. 71) For details of each item, see the Advanced manual. The MENU screen TIP: The MENU screen is constructed in a tree structure. You may go to the next tree level, or go back a level, depending
  • Icom ID-52A | Basic Manual english - Page 35
    [QUICK] in step 5. 2. Select "Default." 12 ••The setting returns to the default. 13 LL The default settings of each item are described in the Advanced manual. 14 15 16 17 18 BASIC
  • Icom ID-52A | Basic Manual english - Page 36
    are briefly displayed, then returns to the VFO mode. TIP: Holding down [MW] for 3 second in step 4 enters the contents into a blank channel. 23 BASIC MANUAL
  • Icom ID-52A | Basic Manual english - Page 37
    Memory channels by rotating [DIAL]. 1 1. Push [MR] to enter the Memory mode. LL For only the ID-52A, pushing [MR] alternately selects the Memory and Weather 2 Channel modes. 2. Rotate [DIAL]. 3 ••Selects a Memory the screen. 17 LL To exit the MENU screen, push [MENU]. 18 BASIC MANUAL 24
  • Icom ID-52A | Basic Manual english - Page 38
    32 GB, can be used in this transceiver. Icom has checked the compatibility with the following cards. ( ) NOTE: ••Before using the microSD card, thoroughly read the instructions of the card. ••If you do any of the following Icom will not be responsible for any damage caused by data corruption of a
  • Icom ID-52A | Basic Manual english - Page 39
    display, only displayed band (A or B) is recorded. LL To exit the MENU screen, push [MENU]. 7 8 9 10 11 12 13 14 15 16 17 18 BASIC MANUAL 26
  • Icom ID-52A | Basic Manual english - Page 40
    is displayed and starts playing. LL To pause, push [ENT]. To restart, push [ENT] again. LL To exit the MENU screen, push [MENU]. 27 BASIC MANUAL
  • Icom ID-52A | Basic Manual english - Page 41
    17 18 NOTE: After removing the microSD card, completely close the [microSD] slot cover as shown to the right. Close the slot cover firmly BASIC MANUAL YES NO 28
  • Icom ID-52A | Basic Manual english - Page 42
    : Displays GPS Memory position.) About the GPS POSITION screen Your course heading Course direction Displays My position. Latitude Longitude Grid Locator Altitude Speed Time BASIC MANUAL 29
  • Icom ID-52A | Basic Manual english - Page 43
    compatible with all mapping software. 5 LL See "Using the GPS Logger function" that can be downloaded from the Icom website for details on copying the log files onto your PC. 6 7 NOTE: ••The GPS Logger function Select "OFF." LL To exit the MENU screen, push [MENU]. 16 17 18 BASIC MANUAL 30
  • Icom ID-52A | Basic Manual english - Page 44
    or other Bluetooth devices. When you connect a Bluetooth headset to the transceiver, you can wirelessly transmit and receive it. Refer to the Advanced manual for more details on the Bluetooth function or VS-3 operation. LL The communication range of Bluetooth is approximately 10 meters (33 feet
  • Icom ID-52A | Basic Manual english - Page 45
    1 Step 1. Selecting the pairing mode of the headset. See the instruction manual of the headset to select the pairing mode. 2 Step 2. Searching 12 Device name is displayed 13 Headset icon while connected. 14 ("ICOM" indicates the Icom headset.) 15 8. To exit the MENU screen, push [MENU
  • Icom ID-52A | Basic Manual english - Page 46
    . 6. Select "YES." LL To exit the MENU screen, push [MENU]. LL To connect to a deleted device, you must first pair with it again. (p. 32) BASIC MANUAL 33
  • Icom ID-52A | Basic Manual english - Page 47
    10.0 ~ 16.0 V DC for external DC power 7.4 V DC specified Icom's battery pack 5.5 V DC specified Icom's battery case ••Current drain (at 7.4 V DC): Transmit (at 5 W) Less than 2.5 A Receive (Maximum output, 8 Ω load) BASIC MANUAL FM/FM-N Less than 400 mA DV Less than 450 mA
  • Icom ID-52A | Basic Manual english - Page 48
    μV - *1 "WFM" is for only BC band. "FM" and "FM-N" is for only A/B band. *2 "AM-N" is for only 108.000 MHz ~ 143.995 MHz. BASIC MANUAL ••Audio output power: Internal speaker External speaker More than 0.75 W at 10% distortion into an 8 Ω load More than 0.2 W at 10% distortion into an 8 Ω load
  • Icom ID-52A | Basic Manual english - Page 49
    ••Device Name: ICOM BT(ID-52) (at default ) 17 ••Passkey: 0000 (four zeros) 18 Fuse Coding explanation Fuse Coding Fuse Voltage Rating Fuse Current Rating OPC-254L (Option) FUSE 250V 3A 250 Volts 3 Amperes CP-12L (Option) FUSE 125V 3A 125 Volts 3 Amperes BASIC MANUAL
  • Icom ID-52A | Basic Manual english - Page 50
    be caused externally by static electricity or by other factors. If this problem occurs, perform a Partial reset or an All reset. BE CAREFUL! all programming and returns all settings to the factory defaults. See the Advanced manual for details. After performing an All reset, you cannot use the DR
  • Icom ID-52A | Basic Manual english - Page 51
    MAINTENANCE 10 ■■ Troubleshooting The following chart is designed to help you correct problems that are not equipment malfunctions. 1 If you are unable to locate the cause of a problem or solve it through the use of this chart, contact your nearest Icom Dealer or Service Center. 2 LL "AM"
  • Icom ID-52A | Basic Manual english - Page 52
    10 MAINTENANCE ■■ Troubleshooting LL "AM" indicates the PDF type Advanced Manual. PROBLEM POSSIBLE CAUSE SOLUTION REF. Transmitting is impossible. The transmit power level is set to operation may generate certain spurious signals, the S-meter appears, or noise may be heard. BASIC MANUAL 39
  • Icom ID-52A | Basic Manual english - Page 53
    D-STAR GUIDE for the ID-52A/ID-52E
  • Icom ID-52A | Basic Manual english - Page 54
    INTRODUCTION ■■ Unique features of D-STAR ••Easy Cross band operation through the repeater! INTERNET 430 MHz 1200 MHz CQCQ CQCQ ••Easy call sign entry with the Repeater list or TX/RX History! ••The Call Sign Capture key [RX>CS] makes call sign capture easy! D-STAR GUIDE 41
  • Icom ID-52A | Basic Manual english - Page 55
    The system includes the DV mode for Digital Voice and the DD mode for Digital 1 Data communications. ••D-STAR supports the DV mode at 4.8 kbps. Your call sign data, and either a short 2 message, or GPS data bandwidth of 10 kHz 10 kHz 10 kHz 10 kHz D-STAR. D-STAR GUIDE 20 kHz 20 kHz 42
  • Icom ID-52A | Basic Manual english - Page 56
    , using Call Sign Routing. Simplex call*: To call another station not using a repeater. * You can make a simplex call in the VFO mode. (p. 50) 43 D-STAR GUIDE
  • Icom ID-52A | Basic Manual english - Page 57
    Repeater operation. The timer limits a continuous transmission. Warning beeps will sound approximately 30 seconds before timeout and then again immediately before the time-out. D-STAR GUIDE 44
  • Icom ID-52A | Basic Manual english - Page 58
    call sign must match the call sign registered on a gateway repeater. (p. 47) ••The MY Call sign in the instructions is ONLY an example that is used in explanations. You MUST enter your own call sign, the one that was assigned as MY call sign. LL To exit the MENU screen, push [MENU]. 45 D-STAR GUIDE
  • Icom ID-52A | Basic Manual english - Page 59
    a call sign, push D-pad() several times until the cursor moves to 15 the right of the "/." 2. Enter a 4 character note. (Example: ID52) 16 17 18 D-STAR GUIDE 46
  • Icom ID-52A | Basic Manual english - Page 60
    needed, ask the gateway repeater administrator for call sign registration instructions. Step 1: Access the call sign registration screen 1. Access . Click Step 2: Register your call sign 1. Follow the registration instructions found there. 2. When you receive a notification from the administrator,
  • Icom ID-52A | Basic Manual english - Page 61
    the D-STAR network. 11 12 NOTE: You must register your D-STAR equipment BEFORE you make Gateway Repeater calls. 13 14 15 16 17 18 D-STAR GUIDE 48
  • Icom ID-52A | Basic Manual english - Page 62
    red while transmitting. 2. Release [PTT] to receive. TIP: You can change the simplex frequencies on the MENU screen. ([MENU] > MEMORY > Repeater List) See the Advanced manual for details. 49 D-STAR GUIDE
  • Icom ID-52A | Basic Manual english - Page 63
    a simplex call in the Memory mode. See page 23 on how to enter Memory channels. 6 7 8 9 10 11 12 13 14 15 16 17 18 D-STAR GUIDE 50
  • Icom ID-52A | Basic Manual english - Page 64
    your destination repeater is listed. 4. Select your destination repeater. ••Returns to the DR screen, and the selected repeater name is displayed in "FROM." 51 D-STAR GUIDE
  • Icom ID-52A | Basic Manual english - Page 65
    destination repeater. TIP: See page 65 for status indications after a reply is received. 2 3 4 5 6 7 Successfully sent! 8 9 10 11 12 13 14 15 16 17 18 D-STAR GUIDE 52
  • Icom ID-52A | Basic Manual english - Page 66
    a note may be displayed after the call sign. LL If a call is received from an area, not from a specific station, "CQCQCQ" is displayed. 53 D-STAR GUIDE
  • Icom ID-52A | Basic Manual english - Page 67
    memory, and returns to the RX HISTORY screen. LL To exit the screen, push [MENU]. 8 9 10 11 12 13 14 15 16 17 18 D-STAR GUIDE 54
  • Icom ID-52A | Basic Manual english - Page 68
    transceiver does not announce the call sign. (MENU > SET > SPEECH > RX > CS SPEECH) ←Captured! While holding down After releasing [RX→CS] D-STAR GUIDE Step 2: Hold down [PTT] to transmit. 1. Hold down [PTT] to transmit. ••The TX/RX indicator lights red while transmitting. 2. Release [PTT] to
  • Icom ID-52A | Basic Manual english - Page 69
    ] to receive. TIP: The Local CQ call is used to call anyone, but you can call a specific station by simply saying their call sign. D-STAR GUIDE 56
  • Icom ID-52A | Basic Manual english - Page 70
    ] to receive. NOTE: If the selected Access repeater does not connect to the gateway, " " is displayed. In that case, you cannot select "Gateway CQ." D-STAR GUIDE 57
  • Icom ID-52A | Basic Manual english - Page 71
    . 12 1. Hold down [PTT] to transmit. ••The TX/RX indicator lights red while transmitting. 13 2. Release [PTT] to receive. 14 15 16 17 18 D-STAR GUIDE 58
  • Icom ID-52A | Basic Manual english - Page 72
    the DR screen, and "Unlink Reflector" and "U" are displayed in "TO." 4. Hold down [PTT] to unlink the reflector. ••The TX/RX indicator lights red. D-STAR GUIDE 59
  • Icom ID-52A | Basic Manual english - Page 73
    , and "Link to Reflector" and "REF030CL" are displayed in "TO." 5. Hold down [PTT] to link to the reflector. ••The TX/RX indicator lights red. D-STAR GUIDE 60
  • Icom ID-52A | Basic Manual english - Page 74
    "Use Reflector" and "CQCQCQ" are displayed in "TO." 4. Hold down [PTT] to transmit. ••The TX/RX indicator lights red. 5. Release [PTT] to receive. 61 D-STAR GUIDE
  • Icom ID-52A | Basic Manual english - Page 75
    . 6 7 8 9 10 11 DDRequesting repeater information When you send the repeater information command, an ID message is sent back. 12 1. Push D-pad() to select "TO," and then push [ENT]. RX indicator lights red. 5. Release [PTT] to hear the repeater ID message. 16 17 18 D-STAR GUIDE 62
  • Icom ID-52A | Basic Manual english - Page 76
    is saved in the TX History: Select from the TX History: Select a repeater that you have accessed before, from the TX History record. 63 D-STAR GUIDE
  • Icom ID-52A | Basic Manual english - Page 77
    call sign: Directly enter the destination station's call sign. To directly enter the destination repeater call sign: Directly enter the destination repeater's call sign. D-STAR GUIDE 64
  • Icom ID-52A | Basic Manual english - Page 78
    . The following chart is designed to help you correct problems which are not equipment malfunctions. LL "AM" indicates the PDF type Advanced manual. PROBLEM POSSIBLE CAUSE SOLUTION REF. After your call, the repeater down [ ] for 1 second to turn OFF the Lock p. 20 function. D-STAR GUIDE 65
  • Icom ID-52A | Basic Manual english - Page 79
    OPERATION PROBLEM AM LL See the Automatic 15 DV detection on the Advanced manual. 16 17 ■■ Updating the repeater list 18 For easy operation is preloaded into your transceiver. You can download the repeater list from the Icom website. NOTE: ••Before using a microSD card, see page 25 for
  • Icom ID-52A | Basic Manual english - Page 80
    , 56 Lock function 20 LO key 2 M MAIN band 11 MAIN key 2, 11 Memory channel Entering 23 Selecting 24 Memory mode 14 MEMORY screen 24 BASIC MANUAL 67
  • Icom ID-52A | Basic Manual english - Page 81
    32 Transmit power level 20 11 Partial Reset 37 Transmitting 19 Playing a recorded audio 27 Troubleshooting 38 12 PTT switch 1 Troubleshooting, DR 65 Tuning step 16 13 Q Turning ON 7 QUICK key 2 14 Quick Menu 37 RPT 65 RX 65 RX→CS key 2, 55 RX history 53 BASIC MANUAL 68
  • Icom ID-52A | Basic Manual english - Page 82
    . specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format in commercial products. If you use this source code in a product, acknowledgment of you. Thanks to Frank J. T. Wojcik for helping with the documentation. BASIC MANUAL 69
  • Icom ID-52A | Basic Manual english - Page 83
    compiler. - gzdopen is not supported on RISCOS or BEOS. 5 minigzip test program, follow Acknowledgments: the instructions given at the top of Makefile. damages arising from check whether the problem still exists or not. the loup Gailly and Mark Adler; BASIC MANUAL .zip format, written on top
  • Icom ID-52A | Basic Manual english - Page 84
    >> SCOPE CD DV GW PICTURE GPS GPS Set GPS Select GPS Option SBAS GLONASS Power Save Satellite Information Out Manual Position GPS Out (USB Port) GPS TX Mode OFF D-PRS NMEA GPS Information GPS Position GPS Memory GPS Alarm Alarm Select Alarm Area (Group) Alarm
  • Icom ID-52A | Basic Manual english - Page 85
    SPEECH Level 18 SET > DTMF/T-CALL DTMF Memory DTMF Speed SET > QSO/RX Log QSO Log RX History Log CSV Format Separator/Decimal Date BASIC MANUAL 72
  • Icom ID-52A | Basic Manual english - Page 86
    ON) Single Band Display Display Unit Latitude/Longitude Altitude/Distance Speed Temperature Barometric Rainfall Wind Speed Display Language*2 System Language BASIC MANUAL *1 May be displayed depending on the transceiver version. *2 Displayed only when "System Language" is set to "Japanese." 73
  • Icom ID-52A | Basic Manual english - Page 87
    Headset Function Select Auto Disconnect 6 RX Priority Setting (LE Device) 7 VOX Icom Headset 8 Data Device Set 9 Serialport Function Bluetooth Device Information 10 Initialize Bluetooth Call CH 18 Your Call Sign Repeater List BASIC MANUAL *3 Paired devices are displayed. 74
  • Icom ID-52A | Basic Manual english - Page 88
    How the World Communicates A7608D-1EX-1 Printed in Japan © 2021 Icom Inc. Oct. 2021 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
BASIC MANUAL
This device complies with part 15 of the FCC
Rules. Operation is subject to the condition that
this device does not cause harmful interference.
VHF/UHF TRANSCEIVER
ID-52A
ID-52E
WARNING:
MODIFICATION OF THIS DEVICE
TO RECEIVE CELLULAR RADIOTELEPHONE
SERVICE SIGNALS IS PROHIBITED UNDER
FCC RULES AND FEDERAL LAW.