Icom ID-52A Basic Manual english - Page 77
“TO” (Destination) setting
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
D-STAR OPERATION ■■ "TO" (Destination) setting By rotating [DIAL]: Select a repeater or Your Call Sign that is displayed by rotating [DIAL] on the DR screen. (This operation is disabled when "CQCQCQ" is set.) To make a Local Area CQ call: Set "CQCQCQ" in "TO" (Destination). To make a Gateway CQ call: Select a repeater from the repeater list, if you want to make a Gateway call. To make a call to a specific station: Select the station call sign in the Your Call Sign. TIP: After you receive the individual 1 station or repeater's signal, the call sign can be captured by holding down the 2 Call Sign Capture key ([RX→CS]), and you can quickly and easily reply to a 3 call. 4 5 6 7 8 9 10 To make a call through a reflector: 11 Select a reflector that is connected to the repeater you want to call through. 12 To select from RX History: 13 When you receive a call, the caller station data is saved in RX History. 14 You can select the destination from the record. 15 16 To select from TX History: When you make a call, the destination 17 repeater or called station data is saved in TX History. You can select the 18 destination from the record. To directly enter the destination station call sign: Directly enter the destination station's call sign. To directly enter the destination repeater call sign: Directly enter the destination repeater's call sign. D-STAR GUIDE 64