Icom ID-52A Basic Manual english - Page 27
Selecting the Frequency Selecting mode, VFO mode, Memory mode, Call Channel mode
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
BASIC OPERATION 3 ■■ Selecting the Frequency Selecting mode DDVFO mode 1 Rotate [DIAL] to set an operating frequency. LL In the VFO mode, is displayed. 2 DD Memory mode 3 Select a Memory channel where an operating frequency and other parameters are saved. LL In the Memory mode, and the Memory Channel number are displayed. 4 DDCall Channel mode 5 Select a Call Channel to recall your most-often used frequencies quickly. LL In the Call Channel mode, and the Call Channel number are displayed. 6 DD Weather Channel mode (For only the ID-52A) 7 Weather Channels are used for monitoring Weather Channels from the National 8 Oceanographic and Atmospheric Administration (NOAA) broadcasts. LL In the Weather Channel mode, is displayed. 9 1. Select a mode. 10 LLInformation ••Push [VFO/MHz] to select the VFO mode. 11 ••In the VFO mode, push [VFO/MHz] to select the 1 MHz tuning step. ••Push [MR] to select the Memory mode. 12 ••Hold down [CALL] for 1 second to select the Call Channel mode. ••For only the ID-52A, push [MR] in the Memory mode to select the Weather Channel 13 mode. 2. Rotate [DIAL] to select an operating frequency or a channel. 14 15 16 17 VFO mode Memory mode Call Channel mode 18 Weather Channel mode ■■ DR function operation Using the D-STAR Repeater (DR) function, you can easily select the entered repeaters and Your call signs by rotating [DIAL]. You can make not only a repeater call but also a simplex call. BASIC MANUAL Hold down [DR] for 1 second. ••Displays the DR screen. LL Hold down [DR] again to cancel the DR function. LL See D-STAR GUIDE (p. 40) for the DR function details. 14