Icom ID-52A Basic Manual english - Page 20
Inserting a microSD card, Turning ON the transceiver, Adjusting the audio level, CAUTION: DO
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2 INITIAL SETUP ■■ Inserting a microSD card See page 25 for the usable microSD card. 1. Turn OFF the transceiver. 2. Pull down the [microSD] slot cover on the side panel. 3. With the terminals facing the front, insert the card into the slot until it locks in place and makes a 'click' sound. LL When removing, push in the microSD card until a 'click' sounds. The card is unlocked, and you can pull it out. NOTE: ••DO NOT touch the terminals. ••DO NOT remove the card from the transceiver while the card is being accessed. Otherwise, the card data may be corrupted or deleted. 4. Completely close the [microSD] slot cover. [microSD] slot CAUTION: DO NOT forcibly or inversely insert the card. It will damage the card or the slot. microSD card Terminals facing the front Slot cover ■■ Turning ON the transceiver zz Hold down [ ] for 1 second to turn ON the transceiver. ••A beep sounds. ••After the opening message and remaining battery capacity are displayed, the operating frequency or repeater name is displayed. zz Hold down [ ] for 1 second again to turn OFF the transceiver. [] ■■ Adjusting the audio level Rotate [VOL] to adjust the audio level. LL The display shows the audio level while adjusting. [VOL] BASIC MANUAL 7