Icom ID-52A Basic Manual english - Page 19
Charging the battery pack, Capacity of the battery pack
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
INITIAL SETUP 2 ■■ Charging the battery pack DDCapacity of the battery pack 1 ICON BATTERY STATUS 2 The battery has sufficient capacity. 3 The battery is exhausted a little. 4 (green) The battery is nearing exhaustion. 5 The battery is almost fully exhausted. LL Immediately charge the battery pack. 6 Otherwise, the icon will soon start blinking, (red) "LOW BATTERY" will be displayed, and the 7 transceiver will automatically turn OFF. 8 To display the correct battery status Select the attached battery pack in the following item. (Default: BP-271/BP-272) 9 ([MENU] > SET > Function > Battery Pack Select) To display the Battery Pack Select dialog every time you attach the battery pack, set the 10 following item to "ON." ([MENU] > SET > Function > Battery Pack Confirmation) 11 NOTE: 12 ••Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. 13 ••BE SURE to turn OFF the transceiver while charging with the supplied battery charger. Otherwise, the attached battery pack cannot be charged. 14 ••While charging, the charging icon " " and "Charging...." are displayed. ••The icon and "Charging...." disappear when the battery pack is fully charged. 15 16 CAUTION: BE SURE to attach the battery 17 pack before connecting the Battery charger. BP-272 (Supplied) 18 To [DC IN] BC-167S LL The shape is different and supplied or optional, depending on the charger version. Turn OFF To an AC outlet BASIC MANUAL Charging time: Approximately 5 hours (When charging the BP-272 with the BC-167S) LL See the Advanced manual about the optional battery packs and chargers. 6