Icom ID-52A Basic Manual english - Page 36
MEMORY OPERATION, Entering Memory channels
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
5 MEMORY OPERATION ■■ Entering Memory channels The transceiver has a total of 1000 Memory channels to save often-used frequencies. In the Memory mode, you can quickly select the saved memories. This section describes the basic channel content entry. Example: Entering 146.030 MHz/FM mode into Channel 11 in Group 01. 1. Push [VFO/MHz] to enter the VFO mode. 2. Push [MODE] to enter the FM mode. 3. Rotate [DIAL] to set a frequency to 146.030 MHz. 4. Hold down [MW] for 1 second. ••A short and a long beep sound. 5. Select "Write to New CH." 6. Push [QUICK]. 7. Select "Group Select." 8. Select Group "01." 9. Rotate [DIAL] to select Channel "11." 10. Push [ENT]. ••The confirmation dialog is displayed. 11. Select "YES." ••Beeps sound and the Memory contents are briefly displayed, then returns to the VFO mode. TIP: Holding down [MW] for 3 second in step 4 enters the contents into a blank channel. 23 BASIC MANUAL