Icom ID-52A Basic Manual english - Page 63
To make a Simplex call in the VFO mode, Hold down [LO] for 1 second to set an output power. p. 20
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
D-STAR OPERATION To make a Simplex call in the VFO mode 1. Push [VFO/MHz] to enter the VFO mode. 2. Rotate [DIAL] to set the operating frequency. (p. 16) 1 3. Push [MODE] to set the operating mode to DV. 4. Hold down [LO] for 1 second to set an output power. (p. 20) 2 5. Hold down [PTT] to transmit, and speak into the microphone at your normal voice level. 3 ••The TX/RX indicator lights red while transmitting. ••The S/RF meter displays the output power level. 4 6. Release [PTT] to receive. 5 LL If you enter a DV simplex frequency to a Memory channel, you can also make a simplex call in the Memory mode. See page 23 on how to enter Memory channels. 6 7 8 9 10 11 12 13 14 15 16 17 18 D-STAR GUIDE 50
D-STAR OPERATION
50
D-STAR GUIDE
1
7
4
10
15
18
2
8
5
11
16
3
9
14
6
17
To make a Simplex call in the VFO mode
1.
Push [VFO/MHz] to enter the VFO mode.
2.
Rotate [DIAL] to set the operating frequency. (p. 16)
3.
Push [MODE] to set the operating mode to DV.
4.
Hold down [LO] for 1 second to set an output power. (p. 20)
5.
Hold down [PTT] to transmit, and speak into the microphone
at your normal voice level.
• The TX/RX indicator lights red while transmitting.
• The S/RF meter displays the output power level.
6.
Release [PTT] to receive.
If you enter a DV simplex frequency to a Memory channel, you can also make a simplex
call in the Memory mode. See page 23 on how to enter Memory channels.