Intel D815EEA2U Product Guide - Page 22
Intel D815EEA2U - P3 Socket 370 ATX Motherboard Manual
UPC - 735858146135
View all Intel D815EEA2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Intel Desktop Boards D815EEA2, D815EPEA2, D815EFV, and D815EPFV Product Guide LAN Subsystem Software For Intel 82562ET Fast Ethernet WfM PCI LAN software and drivers, refer to the D815EEA2, D815EPEA2, D815EFV, or D815EPFV link on Intel's World Wide Web site at: http://support.intel.com/support/motherboards/desktop RJ-45 LAN Connector LEDs Two LEDs are built into the RJ-45 LAN connector. Table 6 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 6. LED Color Green Yellow RJ-45 LAN Connector LEDs LED State Off On Off On (steady state) On (brighter and pulsing) Indicates 10 Mbit/sec speed is selected. 100 Mbit/sec speed is selected. LAN link is not established. LAN link is established. The computer is communicating with another computer on the LAN. Battery A battery on the desktop board keeps the values in CMOS RAM and the clock current when the computer is turned off. See Chapter 2 for instructions on how to replace the battery. Power Management Features Power management is implemented at several levels, including: • Software support: Advanced Power Management (APM) • Advanced Configuration and Power Interface (ACPI) Hardware support: Power connector Fan connectors Wake on LAN technology (optional) Instantly Available technology S5 wake on PCI bus connector 2 only Wake from USB Wake on Keyboard Wake on PME# Resume on Ring If the board is used with an ACPI-aware operating system, the BIOS can provide ACPI support. Otherwise, it defaults to APM support. 22