Intel D845PEBT2 Product Guide - Page 12
Processor, CAUTION
View all Intel D845PEBT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Intel Desktop Board D845PEBT2 Product Guide Processor CAUTION Failure to use an ATX12V power supply, or not connecting the 12 V processor core voltage power supply connector to Desktop Board D845PEBT2 may result in damage to the desktop board and/or power supply. Desktop Board D845PEBT2 supports a single Intel Pentium 4 processor or Intel Celeron processor. Processors are not included with the desktop board and must be purchased separately. The processor connects to the desktop board through the mPGA478-pin socket. The Intel Pentium 4 processor and Intel Celeron processor may be removed and replaced to accommodate supported higher speed processors. Desktop Board D845PEBT2 supports the processors listed in Table 2. Table 2. Supported Processors Type Designation Intel® Pentium® 4 processor on .13 micron process in an mPGA478 package 2.8, 2.66, 2.53, 2.4B, and 2.26 GHz 2.6, 2.5, 2.40, 2.20, 2A, 1.80A, and 1.60A GHz Intel Pentium 4 processor on .18 micron process in an mPGA478 package 2, 1.90, 1.80, 1.70, 1.60, 1.50, and 1.4 GHz Intel® Celeron® processor in 1.8 and 1.7 GHz an mPGA478 package Front Side Bus Frequency 533 MHz 400 MHz L2 Cache 512 KB 512 KB 400 MHz 256 KB 400 MHz 128 KB For the latest information on processor support for Desktop Board D845PEBT2, refer to the Intel World Wide Web site at: http://support.intel.com/support/motherboards/desktop/ For instructions on installing or upgrading the processor, see Chapter 2 on page 23. Desktop Board D845PEBT2 requires an ATX12V compliant power supply to function according to desktop board specifications. The desktop board has two ATX12V compliant power supply connectors that are needed to provide extra power to the Intel 845PE chipset and Intel Pentium 4 processor or Intel Celeron processor. Figure 13 on page 36 shows the two power connector locations. 12