Intel D845PEBT2 Product Guide - Page 9

1 Desktop Board Features Table 1 describes the major features of Intel® Desktop Board D845PEBT2. Table 1. Feature Summary Form Factor Processor Memory Chipset I/O Control Audio LAN Expansion Capabilities ATX at 12.0 inches by 8.5 inches Support for: • Intel® Pentium® 4 processor in an mPGA-478 socket with 533/400 MHz front side bus (FSB) • Intel® Celeron® processor in an mPGA-478 socket with 400 MHz FSB • Two 184-pin Double Data Rate (DDR) SDRAM Dual Inline Memory Modules (DIMMs) with gold-plated contacts • Support for DDR266 and DDR333 (see page 13 for details) • Unbuffered and non-registered single or double-sided DIMMs • Serial Presence Detect (SPD) memory only • Non-ECC RAM (ECC memory will run in non-ECC mode) • 2.5 V memory • Support for up to 2 GB system memory NOTE: Desktop Board D845PEBT2 has been designed to support DIMMs based on 512 Mbit technology up to 2 GB, but this technology has not been validated on this Intel desktop board. For more information about the latest list of tested memory, refer to the Intel World Wide Web site at: http://support.intel.com/support/motherboards/desktop/ Intel® 845PE chipset, consisting of: • Intel® 82845PE Memory Controller Hub (MCH) with Accelerated Hub Architecture (AHA) bus • Intel® 82801DB I/O Controller Hub (ICH4) with support for up to six Hi-Speed Universal Serial Bus 2.0 (USB 2.0) ports • 4 Mbit Firmware Hub (FWH) Support for SMSC LPC47M172 super I/O controller • Intel 845PE chipset (AC '97) • Analog Devices Inc. audio codec • SoundMAX† Cadenza† Intel® 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device and RJ-45 connector • Five PCI bus add-in card connectors • One AGP connector continued 9