Intel D845PEBT2 Product Guide - Page 72
Boot Device Priority Submenu, Hard Disk Drives Submenu, Table 27., Options, Description
View all Intel D845PEBT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Intel Desktop Board D845PEBT2 Product Guide Boot Device Priority Submenu Maintenance Main Advanced Security Power Boot Exit Boot Device Priority The submenu represented in Table 27 is for setting boot devices priority. Table 27. Boot Device Priority Submenu Feature 1st Boot Device 2nd Boot Device 3rd Boot Device Options Description • Removable Device Specifies the boot sequence from the available devices. To specify • Hard Drive boot sequence: • ATAPI CD-ROM 1. Select the boot device with or . • Disabled 2. Press to set the selection as the intended boot device. The operating system assigns a drive letter to each boot device in the order listed. Changing the order of the devices changes the drive lettering. The default settings for the first through final boot devices are, respectively listed below. The BIOS supports up to sixteen total boot devices in any combination of the boot device types below, with respect to these maximums per type. • Removable Device (maximum of four). • Hard Drive (maximum of 12). • ATAPI CD-ROM (maximum of four). Hard Disk Drives Submenu Maintenance Main Advanced Security Power Boot Exit Hard Disk Drives The submenu shown in Table 28 is for setting hard disk drives. Table 28. Hard Disk Drives Submenu Feature 1st Hard Disk Drive (Note) Options Dependent on installed hard drives Description Specifies the boot sequence from the available hard disk drives. To specify boot sequence: 1. Select the boot device with or . 2. Press to set the selection as the intended boot device. Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will display up to twelve hard disk drives, the maximum number of hard disk drives supported by the BIOS. 72