Intel D845PEBT2 Product Guide - Page 65
Table 17., Primary/Secondary IDE Master/Slave Submenus, Using the BIOS Setup Program, Feature, Options
View all Intel D845PEBT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Using the BIOS Setup Program Table 17. Primary/Secondary IDE Master/Slave Submenus (continued) Feature DMA Mode Cable Detected (Note) Options • Auto (default) • SWDMA 0 • SWDMA 1 • SWDMA 2 • MWDMA 0 • MWDMA 1 • MWDMA 2 • UDMA 0 • UDMA 1 • UDMA 2 • UDMA 3 • UDMA 4 • UDMA 5 None Description Specifies the Ultra DMA mode for the drive. Displays the type of cable connected to the IDE interface: 40-conductor or 80-conductor (for ATA-66/100 devices). Note: These configuration options appear only if an IDE device is installed. 65
Using the BIOS Setup Program
65
Table 17.
Primary/Secondary IDE Master/Slave Submenus
(continued)
Feature
Options
Description
DMA Mode
•
Auto (default)
•
SWDMA 0
•
SWDMA 1
•
SWDMA 2
•
MWDMA 0
•
MWDMA 1
•
MWDMA 2
•
UDMA 0
•
UDMA 1
•
UDMA 2
•
UDMA 3
•
UDMA 4
•
UDMA 5
Specifies the Ultra DMA mode for the drive.
Cable Detected
(Note)
None
Displays the type of cable connected to the IDE
interface:
40-conductor or 80-conductor (for
ATA-66/100 devices).
Note:
These configuration options appear only if an IDE device is installed.