Intel D845PEBT2 Product Guide - Page 14
Intel® 845PE Chipset, Intel® 82845PE Memory Controller Hub (MCH), Firmware Hub (FWH), Intel
View all Intel D845PEBT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Intel Desktop Board D845PEBT2 Product Guide Intel® 845PE Chipset The Intel 845PE chipset consists of the following devices: • Intel 82845PE Memory Controller Hub (MCH) with AHA bus • Intel 82801DB I/O Controller Hub (ICH4) with AHA bus • Firmware Hub (FWH) Intel® 82845PE Memory Controller Hub (MCH) The MCH provides the processor, system memory, AGP, and hub interfaces in the Intel 845PE chipset platform. Features on Desktop Board D845PEBT2 include: • Single processor support with 533 MHz or 400 MHz data transfer rates • Support for up to 2 GB (with 512 Mbit technology) DDR SDRAM at 333/266 MHz operation ✏ NOTE 512 Mbit technology has not been validated on these boards • 1.5 V AGP interface with 4X Side Band Addressing (SBA)/data transfer and 2X and 4X fast write Intel® 82801DB I/O Controller Hub (ICH4) The ICH4 integrates many I/O functions and provides the I/O subsystem with access to the rest of the platform. ICH4 features on Desktop Board D845PEBT2 include: • Integrated IDE controller supports two Ultra DMA-33 and ATA-66/100 channels, and PIO modes • SMBus interface • FWH interface • Low Pin Count (LPC) interface • AC '97 2.1 compliant link for audio and telephony codecs • Integrated Intel 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device for interfacing the ICH4 LAN connect interface to LAN connect component • Three UHCI and one EHCI compliant host controllers with support for up to six USB ports Firmware Hub (FWH) The 4 Mbit Firmware Hub has these features: • System BIOS • System security and management logic 14