Intel D845PEBT2 Product Guide - Page 17
Enhanced IDE Interface, Serial ATA, Expansion Slots - driver
View all Intel D845PEBT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Desktop Board Features ✏ NOTE USB devices are limited to USB 1.1 transfer rates prior to operating system and driver initialization. Enhanced IDE Interface The ICH4's IDE interface handles the exchange of information between the processor and peripheral devices like hard disks, CD-ROM drives, and Iomega Zip† drives inside the computer. The interface supports: • Up to four IDE devices (such as hard drives) • ATAPI devices (such as CD-ROM drives) • Older PIO Mode devices • Ultra DMA-33 and ATA-66/100 protocols • Laser servo (LS-120) drives Serial ATA The desktop board supports Serial ATA devices using the Silicon Image SiI3112 SATALink PCI host controller. ✏ NOTE Although the Silicon Image SiI3112 SATALink PCI Serial ATA controller on this product supports up to 150 MB/sec transfer rate, some SATA devices are limited by the PCI bus to a maximum of 133 MB/sec. The controller supports: • 150 MB/sec transfer rate • Up to two SATA devices • PIO and DMA modes • Support for RAID 0 (Striping) or RAID 1 (Mirroring) Expansion Slots Desktop Board D845PEBT2 has the following add-in card connectors: • Five PCI bus add-in card connectors (SMBus routed to PCI bus connector 2) • One AGP connector 17