Intel KD875PBZLKPAK10 Product Specification - Page 103
Drive Configuration Submenu
UPC - 735858160209
View all Intel KD875PBZLKPAK10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
BIOS Setup Program 4.4.4 Drive Configuration Submenu To access this submenu, select Advanced on the menu bar and then Drive Configuration. Maintenance Main Advanced Security Power PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video Configuration USB Configuration Chipset Configuration Fan Control Configuration Hardware Monitoring Boot Exit The menu represented in Table 56 is used to configure IDE device options. Table 56. Drive Configuration Submenu Feature ATA/IDE Configuration Legacy IDE Channels PCI IDE Bus Master Hard Disk Pre-Delay Options • Disabled • Legacy • Enhanced (default) • PATA Pri Only • PATA Sec Only • PATA Pri and Sec • SATA P0/P1 only • SATA P0/P1, PATA Sec • SATA P0/P1, PATA Pri • Disabled • Enabled (default) • Disabled (default) • 3 Seconds • 6 Seconds • 9 Seconds • 12 Seconds • 15 Seconds • 21 Seconds • 30 Seconds Description Disabled = All IDE resources disabled. Legacy = Up to two IDE channels enabled for operating systems that require legacy IDE operation. Enhanced = All Serial ATA (SATA) and Parallel ATA (PATA) resources enabled. Configures PATA and SATA resources for operating systems that require legacy IDE operation. PATA = Parallel ATA SATA = Serial ATA Pri = Primary Sec = Secondary P0 = Serial ATA connector 0 P1 = Serial ATA connector 1 This feature is present only when the ATA/IDE configuration option is set to Legacy. Enables/disables the use of DMA for hard drive BIOS INT13 reads and writes. Specifies the hard disk drive pre-delay. continued 103