Intel KD875PBZLKPAK10 Product Specification - Page 45
LAN Wake Capabilities, CAUTION, 12.2.4, Instantly Available PC Technology
UPC - 735858160209
View all Intel KD875PBZLKPAK10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Product Description 1.12.2.3 LAN Wake Capabilities CAUTION For LAN wake capabilities, the +5 V standby line for the power supply must be capable of providing adequate +5 V standby current. Failure to provide adequate standby current when implementing LAN wake capabilities can damage the power supply. LAN wake capabilities enable remote wake-up of the computer through a network. The LAN subsystem PCI bus network adapter monitors network traffic at the Media Independent Interface. Upon detecting a Magic Packet* frame, the LAN subsystem asserts a wake-up signal that powers up the computer. Depending on the LAN implementation, the Desktop Board D875PBZ supports LAN wake capabilities with ACPI in the following ways: • PCI bus PME# signal for PCI 2.2 compliant LAN designs • Onboard LAN subsystem 1.12.2.4 Instantly Available PC Technology CAUTION For Instantly Available PC technology, the +5 V standby line for the power supply must be capable of providing adequate +5 V standby current. Failure to provide adequate standby current when implementing Instantly Available PC technology can damage the power supply. Instantly Available PC technology enables the Desktop Board D875PBZ to enter the ACPI S3 (Suspend-to-RAM) sleep-state. While in the S3 sleep-state, the computer will appear to be off (the power supply is off, and the front panel LED is amber if dual colored, or off if single colored.) When signaled by a wake-up device or event, the system quickly returns to its last known wake state. Table 10 on page 43 lists the devices and events that can wake the computer from the S3 state. The Desktop Board D875PBZ supports the PCI Bus Power Management Interface Specification. For information on the version of this specification, see Section 1.4. Add-in boards that also support this specification can participate in power management and can be used to wake the computer. The use of Instantly Available PC technology requires operating system support and PCI 2.2 compliant add-in cards and drivers. 45