Intel KD875PBZLKPAK10 Product Specification - Page 20
Processor
UPC - 735858160209
View all Intel KD875PBZLKPAK10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Intel Desktop Board D875PBZ Technical Product Specification 1.5 Processor ✏ NOTE Refer to Thermal Considerations (Section 2.12, page 79) for important information when using an Intel Pentium 4 processor operating above 2.80 GHz with this Intel desktop board. The board is designed to support Intel Pentium 4 processors in an mPGA478 processor socket with a 533/800 MHz system bus. See the Intel web site listed below for the most up-to-date list of supported processors. For information about... Supported processors for the D875PBZ board Refer to: http://www.intel.com/design/motherbd/bz/bz_proc.htm CAUTION Use only the processors listed on web site above. Use of unsupported processors can damage the board, the processor, and the power supply. # INTEGRATOR'S NOTES • Use only ATX12V-compliant power supplies with the board. ATX12V power supplies have an additional power lead that provides required supplemental power for the processor. Always connect the 20-pin and 4-pin leads of ATX12V power supply to the corresponding connectors, otherwise the board will not boot. • Do not use a standard ATX power supply. The board will not boot with a standard ATX power supply. • Refer to Table 4 on page 21 for a list of supported system bus frequency and memory speed combinations. For information about Power supply connectors Refer to Section 2.8.2.2, page 61 20