Intel S845WD1-E Product Guide - Page 40
Removing DIMMs, The DIMM pops out of the socket.
UPC - 735858159272
View all Intel S845WD1-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Removing DIMMs To remove a DIMM, follow these steps: 1. Observe the safety and ESD precautions at the beginning of this chapter. 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Remove the AC power cord from the server. 4. Remove the server's cover. 5. Gently spread the retaining clips at each end of the socket. The DIMM pops out of the socket. 6. Hold the DIMM by the edges, lift it away from the socket, and store it in an anti-static package. 7. Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets. 8. Replace the server's cover and reconnect the AC power cord. 40 Intel Server Board S845WD1-E (S845WD1H) Product Guide
40
Intel Server Board S845WD1-E (S845WD1H) Product Guide
Removing DIMMs
To remove a DIMM, follow these steps:
1.
Observe the safety and ESD precautions at the beginning of this chapter.
2.
Turn off all peripheral devices connected to the server.
Turn off the server.
3.
Remove the AC power cord from the server.
4.
Remove the server’s cover.
5.
Gently spread the retaining clips at each end of the socket.
The DIMM pops out of the socket.
6.
Hold the DIMM by the edges, lift it away from the socket, and store it in an anti-static
package.
7.
Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets.
8.
Replace the server’s cover and reconnect the AC power cord.