Intel S845WD1-E Product Guide - Page 67
IDE Configuration Submenu, Advanced, Diskette Configuration
UPC - 735858159272
View all Intel S845WD1-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Table 23. Primary/Secondary IDE Master/Slave Submenus (continued) Feature PIO Mode (Note) (This feature is present only when Type is not set to Auto.) Ultra DMA (This feature is present only when Type is not set to Auto.) Cable Detected (Note) Options • Auto (default) • Mode 0 • Mode 1 • Mode 2 • Mode 3 • Mode 4 • Disabled (default) • Mode 0 • Mode 1 • Mode 2 • Mode 3 • Mode 4 • Mode 5 No options Description Specifies the PIO mode. Specifies the Ultra DMA mode for the drive. Displays the type of cable connected to the IDE interface: 40-conductor or 80-conductor (for ATA-66/100 devices). Note: These configuration options appear only if an IDE device is installed. Diskette Configuration Submenu To access this menu, select Advanced on the menu bar, then Diskette Configuration. Maintenance Main Advanced Security Power PCI Configuration Boot Configuration Peripheral Configuration IDE Configuration Diskette Configuration Event Log Configuration Boot Exit The submenu represented by Table 24 is used for configuring the diskette drive. Table 24. Diskette Configuration Submenu Feature Options Description Diskette Controller Floppy A • Disabled • Enabled (default) Disables or enables the integrated diskette controller. • Not Installed • 360 KB 5¼ inch Specifies the capacity and physical size of diskette drive A. • 1.2 MB 5¼ inch • 720 KB 3½ inch • 1.44/1.25 MB 3½ inch (default) • 2.88 MB 3½ inch continued Configuration Software and Utilities 67