Intel S845WD1-E Product Guide - Page 49
Connecting the IDE Cable, server board as shown
UPC - 735858159272
View all Intel S845WD1-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Connecting the IDE Cable The Intel® boxed server board package includes a 40-contact, 80-conductor IDE cable. It is capable of connecting two drives to the server board. The cable supports Ultra ATA/66 and Ultra ATA/100 transfer protocols and is backward compatible with drives using slower IDE transfer protocols. For the cable to function correctly: • Attach the cable end with the single connector (A), which is black and labeled PRI IDE, to the server board as shown in Figure 13. • Attach the cable end with the two closely spaced connectors (B), which are gray and black and are labeled P2 and P3, to the drives. • If connecting only one IDE drive, be sure to connect the drive to the gray connector (P3). B A TP00006 Figure 13. Connecting the IDE Cable Server Board Installation and Upgrading 49