Invacare M91R Owners Manual - Page 103

Van Seat

Get Invacare M91R PDF manuals and user guides View all Invacare M91R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 103 highlights

8 SETUP/MAINTENANCE Van Seat  For this procedure, refer to FIGURE 11. Take note of position and orientation of mounting hardware for reinstalling the joystick assembly. 1. Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket. 2. Remove the joystick from the wheelchair. 3. Remove the three hex mounting screws, spacers and locknuts that secure the mounting bracket to the three mounting holes on the arm frame.  The mounting bracket is mounted to the inside of the arm frame. 4. Reposition the mounting bracket on the opposite arm frame. 5. Using the three hex mounting screws, spacers and locknuts secure the mounting bracket to the three mounting holes of the arm frame. 6. If necessary, perform the following to reposition the adjustment lock: A. Slide the adjustment lock from the mounting bracket. B. Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the mounting bracket. 7. Slide joystick mounting tube through the mounting bracket to the desired position and secure adjustment lock to tube by turning lever on adjustment lock.  MK5 SPJ-80 joystick shown, all other joysticks reposition in the same way. Locknuts Arm Frame Part No 1143153 Hex Mounting Screws Spacers Adjustment Lock Lever Mounting Bracket FIGURE 11 Repositioning Joystick - Van Seat 103 Joystick Mounting Tube Invacare® Pronto® M91™

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
8
SETUP/MAINTENANCE
Part No 1143153
103
Invacare® Pronto® M91™
Van Seat
1.
Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket.
2.
Remove the joystick from the wheelchair.
3.
Remove the three hex mounting screws, spacers and locknuts that secure the mounting bracket to the three mounting holes on the arm frame.
4.
Reposition the mounting bracket on the opposite arm frame.
5.
Using the three hex mounting screws, spacers and locknuts secure the mounting bracket to the three mounting holes of the arm frame.
6.
If necessary, perform the following to reposition the adjustment lock:
A.
Slide the adjustment lock from the mounting bracket.
B.
Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the mounting bracket.
7.
Slide joystick mounting tube through the mounting bracket to the desired position and secure adjustment lock to tube by turning lever on
adjustment lock.
FIGURE 11
Repositioning Joystick - Van Seat
For this procedure, refer to FIGURE 11.
Take note of position and orientation of mounting hardware for reinstalling the joystick assembly.
The mounting bracket is mounted to the inside of the arm frame.
Hex Mounting Screws
Locknuts
Adjustment Lock Lever
Joystick Mounting Tube
Mounting Bracket
Spacers
Arm Frame
MK5 SPJ-80 joystick shown, all other
joysticks reposition in the same way.