Invacare M91R Owners Manual - Page 26

Footplates and Front Rigging - m91 footrest

Get Invacare M91R PDF manuals and user guides View all Invacare M91R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

2 SAFETY Footplates and Front Rigging ƽ WARNING If the wheelchair dips forward and the footplates touch the ground while the wheelchair is in motion, please contact your dealer for an inspection and avoid use of the wheelchair if possible. Otherwise the user could be injured. ALWAYS maintain a minimum of 3-inches between bottom of the front riggings and the floor/ground while the wheelchair is in motion to ensure proper ground clearance. If necessary, adjust the front rigging height or tilt seat to achieve proper ground clearance. When determining the depth of the telescoping front frame tubes, make sure the rear of the footrests DO NOT interfere with the movement of the front casters. Otherwise damage to the wheelchair may result or may impede proper operation. DO NOT use the footplates/footboard as a platform. When getting in or out of the wheelchair, make sure that the footplates are in the upward position or swing footrests towards the outside of the wheelchair. Make sure detent balls of the quick-release pin are fully released before operating the wheelchair. Keep detent balls clean. Invacare® Pronto® M91™ 26 Part No 1143153

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
2
SAFETY
Invacare® Pronto® M91™
26
Part No 1143153
Footplates and Front Rigging
±
WARNING
If the wheelchair dips forward and the footplates touch the ground while the wheelchair is in motion, please contact your
dealer for an inspection and avoid use of the wheelchair if possible. Otherwise the user could be injured.
ALWAYS maintain a minimum of 3-inches between bottom of the front riggings and the floor/ground while the wheelchair
is in motion to ensure proper ground clearance. If necessary, adjust the front rigging height or tilt seat to achieve proper
ground clearance.
When determining the depth of the telescoping front frame tubes, make sure the rear of the footrests DO NOT interfere
with the movement of the front casters. Otherwise damage to the wheelchair may result or may impede proper operation.
DO NOT use the footplates/footboard as a platform. When getting in or out of the wheelchair, make sure that the
footplates are in the upward position or swing footrests towards the outside of the wheelchair.
Make sure detent balls of the quick-release pin are fully released before operating the wheelchair.
Keep detent balls clean.