Invacare M91R Owners Manual - Page 109
CMPJ+, PSR+, PSF+ Joysticks or Displays
View all Invacare M91R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
9 TROUBLESHOOTING NUMBER OF FLASHES 7 8 9 10 11 ERROR CODE DESCRIPTION Remote Fault Controller Fault Communications Fault General Fault Incompatible or incorrect Remote POSSIBLE SOLUTION Check to make sure joystick is connected properly. Turn Joystick off then on. Contact Invacare/Dealer for service. Contact Invacare/Dealer for service. Check joystick cable connections. Check joystick cable and connectors for damage. Contact Invacare/Dealer for service. Contact Invacare/Dealer for service. Wrong type of remote connected. Contact Invacare/Dealer for service. CMPJ+, PSR+, PSF+ Joysticks or Displays SYMPTOM PROBABLE CAUSE SOLUTIONS LEFT BRAKE FAULT or RIGHT BRAKE FAULT displays and wheelchair does not drive. Motor lock levers disengaged (Error Engage motor lock levers. Refer to Disengaging/Engaging code E9 or E10). Motor Lock Levers on page 66. CHARGER PLUGGED IN displays. Battery charger connected (Error Unplug battery charger from the wheelchair. Refer to code E28). Charging Batteries on page 57. BATTERY FAULT displays and the wheelchair does not drive. Batteries need to be charged (Error code E14). Charge batteries. Refer to Charging Batteries on page 57. If batteries fail to charge properly, check battery charger or replace batteries. Refer to Replacing the Batteries and/or Battery Cables on page 90. JOYSTICK TIMEOUT displays and the wheelchair does not drive. Joystick or input device is disconnected (Error code 32). Turn off power, reconnect the joystick of input device and turn power on. Part No 1143153 109 Invacare® Pronto® M91™