Invacare M91R Owners Manual - Page 97

Removing 1. Remove the quick release pin that secures the footboard assembly to the wheelchair frame by depressing the button while sliding the pin out. 2. Remove the footboard assembly from the wheelchair frame. Installing ƽ WARNING Make sure the detent balls of the quick release pin are fully released and protruding past the outer edge of the tube before operating the wheelchair. Otherwise, injury and/or damage may result. Keep detent balls clean. 1. Position the footboard assembly onto the wheelchair frame so that the mounting hole in the wheelchair frame aligns with the desired mounting hole in the footboard assembly. 2. Install the quick release pin by depressing the button while sliding the pin in. Ensure that the detent balls of the quick release pin are fully released and protruding past the outer edge of the tube (Detail "A"). Wheelchair Frame Mounting Hole Three Depth Adjustment Holes Quick Release Pin Detent Ball 8 SETUP/MAINTENANCE Footboard Assembly DETAIL "A" - BOTTOM VIEW OF FOOTBOARD Quick Release Pin Outer Edge of Tube Detent Balls FIGURE 5 Removing/Installing the Footboard Assembly Part No 1143153 97 Invacare® Pronto® M91™