Invacare M91R Owners Manual - Page 105

Invacare M91R Manual

Get Invacare M91R PDF manuals and user guides View all Invacare M91R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 105 highlights

MPJ+ Joysticks  For this procedure, refer to FIGURE 13. Disconnecting 1. Pull the latch away from the joystick connector. 2. Disconnect the joystick connector from the remaining connectors Connecting  Ensure the gaskets are installed in the top connector cap and between network connectors. 1. Ensure the latch is pulled away from the network connector. 2. Connect the network connector to the other connectors. 3. Top and Bottom Connectors - Install connector caps onto the network connector. 4. Push the latch in to secure the network connectors and caps. 5. If necessary secure excess cable using tie-wraps. Top Connector Cap Network Connectors Controller Cable Bottom Connector Cap 8 SETUP/MAINTENANCE Latch Gasket Gasket Gasket FIGURE 13 Disconnecting/Connecting the Joysticks MPJ+ Joysticks Part No 1143153 105 Invacare® Pronto® M91™

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
8
SETUP/MAINTENANCE
Part No 1143153
105
Invacare® Pronto® M91™
MPJ+ Joysticks
Disconnecting
1.
Pull the latch away from the joystick connector.
2.
Disconnect the joystick connector from the remaining connectors
Connecting
1.
Ensure the latch is pulled away from the network connector.
2.
Connect the network connector to the other connectors.
3.
Top and Bottom Connectors - Install connector caps onto the
network connector.
4.
Push the latch in to secure the network connectors and caps.
5.
If necessary secure excess cable using tie-wraps.
FIGURE 13
Disconnecting/Connecting the Joysticks -
MPJ+ Joysticks
For this procedure, refer to FIGURE 13.
Ensure the gaskets are installed in the top
connector cap and between network connectors.
Top Connector
Cap
Latch
Gasket
Network
Connectors
Gasket
Controller
Cable
Gasket
Bottom
Connector
Cap