Invacare M91R Owners Manual - Page 96
Removing/Installing the Footboard Assembly
View all Invacare M91R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
8 SETUP/MAINTENANCE 8.10 Removing/Installing the Footboard Assembly ƽ WARNING After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely otherwise injury or damage may result. Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the Off position. Pinch point may occur when rotating the footboard assembly. DO NOT stand on the flip-up footboard. When getting in or out of the wheelchair, make sure that the flip-up footboard is in the upward position. LIMITED CLEARANCE BETWEEN FOOTBOARD AND CASTER - The user's feet MUST remain on the footboard while operating the wheelchair. If the user's feet are allowed to rest off the side of the footboard they may come in contact with the caster possibly resulting in injury. For this procedure, refer to FIGURE 5 on page 97. Invacare® Pronto® M91™ 96 Part No 1143153