JVC DLA-S15U DLA-S15U User instruction manual (2.1MB) - Page 27

Basic Operations s Projector's buttons STAND BY OPERATE LAMP TEMP EMERGENCY VIDEO COMPUTER SETTING +3 QUICK ALIGN. -2 STAND BY indicator OPERATE indicator OPERATE button 2, 1 MAIN POWER switch 1, 2 The following describes the basic procedure for normal use of the projector. 1. Turning on the Power 1 Turn on the MAIN POWER switch. ON [ ƒ ]:The main power turns on and the STAND BY indicator comes on. Projector's indicator \ STAND BY (ON) 2 Press the OPERATE button. (Or press the remote control's OPERATE button for one second or more.) • The OPERATE indicator comes on. • About 30 seconds after the MAIN POWER switch is turned on, you can start projecting. Remote control unit Projector OPERATE (ON) or OPERATE s Remote control unit OPERATE COMPUTER VIDEO OPERATE button 2, 1 Notes • After the power is turned on, the screen may be jumbled for a few seconds, but this is not a malfunction. • If the light-source lamp does not light up, try to press the OPERATE button again. (Or, press the OPERATE button on the remote control for more than a second.) s Turning off the Power 1 Press the OPERATE button. (Or press the remote control's OPERATE button for one second or more.) Example of the projector's button Projector (ON) OPERATE (Blinking) \ STAND BY VOL. PAGE BACK PRESET QUICK ALIGN. FOCUS MENU/ENTER AV MUTING 26 • The STAND BY indicator changes to blinking, and the projector goes into cool-down mode. 2 Turn off the MAIN POWER switch after the STAND BY indicator changes to steady on. OFF [‡]: The MAIN POWER switch turns off and the STAND BY indicator goes off. Projector \ (OFF) STAND BY * Do not turn off the MAIN POWER switch during cool down mode (the STAND BY indicator blinking). Turn it off after the STAND BY indicator becomes on (standby mode).