JVC DLA-S15U DLA-S15U User instruction manual (2.1MB) - Page 46

Operating the Main Menu (Cont.) Setting and Adjusting Other Functions (OPTIONS) (Cont.) s Remote control unit OPERATE COMPUTER VIDEO MENU/ENTER button VOL. PAGE BACK PRESET QUICK ALIGN. FOCUS MENU/ENTER AV MUTING Cursor buttons PAGE BACK button s Submenu items [OPTIONS menu] Adjustment item Button Adjustment content Sets background color when there is no input signal. (Factory setting : BLUE) BACK COLOR 2/3 BLUE CYAN BLACK GREEN COLOR TEMP. ASPECT CHANGE SLEEP TIME 2/3 YELLOW RED MAGENTA Sets the color temperature of the video image being projected. Make adjustment when the image becomes reddish or bluish. (Factory setting : MIDDLE) LOW : Color temperature decreases (video image becoming reddish). MIDDLE : Results in middle color temperature. HIGH : Color temperature increases (video image becoming bluish). LOW MIDDLE HIGH 2/3 2/3 Sets the vertical-to-horizontal ratio (4 : 3 or 16 : 9) of the video image projected. (Factory setting : 4 : 3) 4 : 3 : The aspect ratio of the screen becomes 4 : 3. Set it to 4 : 3 for video of NTSC, NTSC4.43, PAL, SECAM. 16 : 9: The aspect ratio of the screen becomes 16 : 9. Set it to 16 : 9 for HiVision devices (W-VHS VCR, etc.) 4 : 3 16 : 9 Sets the length of sleep time which automatically brings the projector into standby state. You can select one of the following sleep times : 10 minutes, 20 minute, 30 minutes, and 60 minutes. (Factory setting : 30 minutes) 10 20 30 60 OPTIONS MENU AUTO OFF LINE DISPLAY RIGHT LEFT REV. TOP BOTTOM INV. CLAMP RESIZE BACK COLOR COLOR TEMP. ASPECT CHANGE SLEEP TIME LAMP TIME NO ON OFF OFF BP ON BLUE MIDDLE 4:3 30 Min. 10 H. ¶ To return to the main menu, press the PAGE BACK button. To finish the main menu, press PAGE BACK again. • To finish the menu display from the submenu display (OPTIONS menu), press PAGE BACK twice. Notes • The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode. • Items to be set (adjusted) are different when AV signals are input and when computer-system signals are input. Note • When you view a conventional (normal) 4 :3 video picture, which is not wide video picture, on the projector's screen the aspect change function, the upper and lower parts of the video picture become partially invisible. View such an original video picture in 4 :3 mode, respecting the producer's intention. ENGLISH 45