JVC DLA-S15U DLA-S15U User instruction manual (2.1MB) - Page 45

Operating the Main Menu (Cont.) Setting and Adjusting Other Functions (OPTIONS) (Cont.) s Remote control unit OPERATE COMPUTER VIDEO MENU/ENTER button VOL. PAGE BACK PRESET QUICK ALIGN. FOCUS MENU/ENTER AV MUTING Cursor buttons PAGE BACK button s Submenu items [OPTIONS menu] OPTIONS MENU AUTO OFF LINE DISPLAY RIGHT LEFT REV. TOP BOTTOM INV. CLAMP RESIZE BACK COLOR COLOR TEMP. ASPECT CHANGE SLEEP TIME LAMP TIME NO ON OFF OFF BP ON BLUE MIDDLE 4:3 30 Min. 10 H. Notes • The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode. • Items to be set (adjusted) are different when AV signals are input and when computer-system signals are input. • When you turn the RESIZE function ON, allowing the screen to be enlarged virtually to its full size for projection (resizing display), the video image (resolution) becomes coarse. 5 Set (adjust) the desired item with the cursor button 2 or 3. • To adjust multiple items, repeat steps 4 and 5. Adjustment item MENU AUTO OFF Button 2/3 Adjustment content Sets whether to clear the menu display automatically a fixed time later or not. (Factory setting : NO) YES: Clears the display automatically in about 25 seconds. NO : Does not clear the display automatically. NO YES LINE DISPLAY 2/3 Sets whether to show the line display (Y/C, VIDEO, etc.) at the top of the projected screen or not. (Factory setting : ON) OFF: Does not show the line display. ON : Shows the line display. (The line display disappears about 5 seconds after it is shown.) OFF ON RIGHT LEFT REV. 2/3 Reverses video image right-to-left. (Factory setting : OFF) OFF: For the front method ON : For upside hanging from the ceiling OFF ON TOP BOTTOM INV. 2/3 Inverses video image upside-down. (Factory setting : OFF) OFF: For normal set-up ON : For upside hanging from the ceiling OFF ON CLAMP 2/3 Sets the clamp pulse's position at the back porch (BP) or on the sink tip (ST). Normally, the clamp is used at BP. If, with some PCs or workstations, the screen becomes unstable such as being too dark or too bright, try to switch to ST. (factory setting: BP) BP : The clamp pulse is positioned at the back porch. ST : The clamp pulse is positioned on the sink tip. BP ST RESIZE 2/3 When the number of pixels (resolution) sought by the input video is smaller than that (resolution) of D-ILA device, the video image is then enlarged to virtually full screen size of D-ILA device and projected (resizing display). (Factory setting : ON) Does not work (cannot be set) for video system input. OFF : Does not enlarge the video image for projection. When the number of pixels sought by video image is smaller than that of D-ILA device, projection takes place on a small screen size with a black area around the screen. ON : Enlarges virtually to the full screen size of D-ILA device for projection (resizing display). OFF ON (To be continued on the next page) 44