JVC DT-V1710CGU Instruction Manual - Page 20
How To Use, Setup Menu
UPC - 046838208102
View all JVC DT-V1710CGU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
HOW TO USE "SETUP MENU" (cont'd) PICTURE SUB ADJ. Controls the approximate adjustment of the video control level when the video adjustment knob is adjusted to the center. • Can also be used to switch the NTSC set-up level, and change the component signal's input level settings. Press the button to display the setting menu illustrated on the right. NOTE : When the RGB signal is input, only CONTRAST and BRIGHT are displayed. When the PAL signal is input, only CONTRAST, BRIGHT and CHROMA are displayed. CONTRAST BRIGHT CHROMA PHASE NTSC SETUP COMPO.LEVEL sub menu reset : 00 : 00 : 00 : 00 : 00 :SMPTE EXIT: MENU ADJUST:- + SELECT: Ⅵ CONTRAST • -20 ~ 00 ~ +20 Ⅵ BRIGHT • -20 ~ 00 ~ +20 Ⅵ CHROMA • -20 ~ 00 ~ +20 Ⅵ PHASE • -20 ~ 00 ~ +20 Ⅵ NTSC SETUP Sets the set-up level of the input NTSC signal. 00 : Compliant with 0% set-up signal. 7.5 : Compliant with 7.5% set-up signal. NOTE : NTSC SETUP is displayed only when the video input card is installed and an NTSC signal is input. Ⅵ COMPO. LEVEL Sets the set-up level of the input component signal. SMPTE : Compliant with M2VTR signals. B75 : Compliant with Betacam 7.5% set-up signal. B00 : Compliant with Betacam 0% set-up signal. NOTE : COMPO. LEVEL is displayed only when a 480/60i, 480/60p, 576/ 50i or 576/50p signal is input. COLOR TEMP./BAL. Sets or adjusts the color temperature or white balance. Press the button to display the setting menu illustrated on the right. • Use the five items indicated with mark to make fine adjustments between the monitors. COLOR TEMP. BLUE DRIVE RED DRIVE GREEN CUTOFF BLUE CUTOFF RED CUTOFF sub menu reset :LOW : 000 : 000 : 000 : 000 : 000 EXIT: MENU ADJUST:- + SELECT: Ⅵ COLOR TEMP. Selects the color temperature. HIGH : Sets the color temperature to 9300. LOW : Sets the color temperature to 6500. Ⅵ BLUE DRIVE Adjusts the blue drive level. • MIN ~ 000 ~ MAX (in 127 grades) Ⅵ RED DRIVE Adjusts the red drive level. • MIN ~ 000 ~ MAX (in 127 grades) Ⅵ GREEN CUTOFF Sets the green cut-off point. • MIN ~ 000 ~ MAX (in 205 grades) Ⅵ BLUE CUTOFF Sets the blue cut-off point. • MIN ~ 000 ~ MAX (in 205 grades) Ⅵ RED CUTOFF Sets the red cut-off point. • MIN ~ 000 ~ MAX (in 205 grades) 20